nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

To Do column not needed on active board, but getting rid of it hides my backlog

Jim Strange_uuicuk

I have a number of columns on my sprint board. One of them is To Do. This is always empty because only things that are in a status of "Ready for Dev" (the subsequent status) appear in my sprint.

However, if I configure the board to NOT show the "To Do" column, then no issues appear in my backlog.

What am I doing wrong?

Accepted answers

Nic Brough -Adaptavist-

For an issue to appear on a board , it needs to be selected and shown by the board. If you remove status from the board (by not mapping them into a column), then you are telling Jira that the issues should not be selected for view, which means they should not be in the backlog.

You do not need a to-do column to be there specifically, but you should map every status available into a column to stop things dropping out of the backlog/board.

John Funk

Hi Jim,

The status has to be on your board somewhere for the issues to show up, even if the issue is just in a Backlog column. So, having said that, our teams have created a Backlog column as the first column on the board. Then you can even have a To Do column or whatever you want for items that have advanced past the Backlog stage in the second column.

All comments

Nic Brough -Adaptavist-

You do not need a to-do column to be there specifically, but you should map every status available into a column to stop things dropping out of the backlog/board.

Jim Strange_uuicuk

That's just it: I DON'T want my backlog items to appear on my sprint board (who would :-) ?). But if I remove the "To Do" column (which is always empty) from the Sprint board, the issues also disappear from the backlog.

Are you saying that I MUST have an empty column on my sprint board in order for the backlog to be viewable? That makes no sense, and certainly wasn't the case on a previous project (to which I no longer have access, so I can't compare statuses and workflow directly)

The alternative is to assume that the status of every backlog item doesn't change when it's brought into the sprint, in order to populate the leftmost column (To Do). Which, of course, ignores the basic principle that something must be Ready to come into a sprint, but doesn't need to be Ready to be in the backlog.

My statuses are To Do (not fully defined but we know we probably need it - ie, on the backlog), then "Ready" (defined and ready to be worked on in a sprint), and then a series of statuses heading towards "Done."

It sounds like Jira doesn't make the distinction between backlog and "Ready." Is that right?

John Funk

Hi Jim,

Jim Strange_uuicuk

Ok - so as I understand it, Jira makes no distinction between things that are just in the backlog, and things that are ready to be brought into a sprint. So "To Do" (the default first state) needs to mean both, "I just thought of this thing we might want to do," and, "This is fully elaborated and ready for us to start building."

If you add a state to make that distinction, you're forced to have an empty column in your Sprint board in order to see all the issues in the backlog.

Bizarre!

John Funk

No, Backlog is just a status and could literally be placed anywhere - it's up to your team for implementing best practices. Also, it depends on your workflow - typical workflows have issues going straight to the Backlog status for Software projects, it it could go to another one. Ya gotta start somewhere and backlog is usually that :-)

Jim Strange_uuicuk

Right. So how do I have a backlog that is visible in backlog view but doesn't need a column in my active sprint view?

If I use the standard starting status of "To Do" then the only way I can see the issues in that status in the backlog is to also have a column/status called "To Do" in my active sprint board. If I remove that column in the active sprint board, then all issues in the status in the backlog are invisible in backlog view!

I'm talking about backlog as a set of issues that are not yet in the sprint, rather than as a status. I guess I'm after the same sort of behaviour you get on the Kanban board, where you can hide the backlog column but still see the contents of the backlog when looking at backlog view

Nic Brough -Adaptavist-

No, you don't have to have an empty column. What you need for an issue to appear (on the board or in the backlog) is for it to match the board filter, and be in a status that is mapped into a column on the board.

To draw things into a sprint, you don't change their status, you just group them together with the sprint. When you start the sprint, the issues appear on the board, without needing a status change.

You are correct, Jira just has a backlog from which you draw a sprint. Everything in the backlog is "ready" assuming that means "it needs something doing to it"

Jim Strange_uuicuk

Yes, I get that. My point is that if I want to see the entirety of the backlog, all the issues in that backlog need to have a status that is mapped to a column on the active sprint board. I can't have a backlog full of issues in "To Do" and then have a sprint board that DOESN'T have a "To Do" column.

My statuses are as follows:

"To Do" (Stuff we think we're going to do but haven't refined - they're not ready to be implemented)

"Ready" (Stuff we've elaborated and it's ready to build)

[some other statuses that we'll push through during the sprint]

"Done" (meets Definition of Done)

I don't want to see the "To Do" stuff in my active sprint because it's not ready to build; so I hide the "To do" column. But now I can't see the issues in the backlog, because they're in a status of "To Do" (because they're not yet "Ready." Remember, I don't want to bring anything into the sprint that isn't "Ready." This is pretty standard stuff. Show me a team that brings stuff into the sprint that isn't ready to build, and I'll show you a team that isn't performing.)

So I can either have an (empty) "To Do" column in my active sprint board, and see the backlog of "To Do" status issues in the backlog view. Or I can see only stuff that's "Ready" (or further along) in the active sprint - but then I can't see the backlog which is full of "To Do" issues.

Or I can just pretend that "To Do" also means "Ready" in Jira-world and have to put a different field or flag or label on the stories that actually are ready to bring into a sprint.

If there's a way of having a visible backlog full of issues that are "To Do" without having to have a "To Do" column on my active sprint, it's eluding me!

Helena Jerney_xp1wgb

Jim,

Quick question.

I have the same issue and all I could do was move the columns to the right so I wouldn't have the empty columns as visible on the Board.

I also have statuses that are meant to manage items in the Backlog previous to accepting them into a sprint. Did you find another solution?

Thanks!

Danielle S

I have the same frustration as Jim and don't understand the purpose. What is the use-case for not wanting to see them in the backlog? And if I do want to see them in the backlog, also requiring me to place a column for them in the scrum board which would remain empty? The only reason I can think is that the scrum board's purpose is to work in isolation of creating and grooming tickets, which is supposed to be done in another space or board.

My Solution:

When editing the scrum board columns, I move the backlog status to the blocked column. As long as I don't add any backlog status tickets in the active sprint, none of them will show there. This keeps me from having to add a separate column.

I also like the idea of a "pull from backlog" column mentioned above. I will consider that for future sprints.

Welcome!

It looks like you're new here. Sign in or register to get started.

Quick Links

Find more posts tagged with

cloud

jira-software

jira-software-cloud