nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

git push to bitbucket.org fails due to OpenSSL errors

Andrin Meier

Hello,

I and many of my coworkers have problems pushing and pulling from bitbucket.org. The error is:

OpenSSL SSL_connect: Connection was aborted in connection to bitbucket.org:443

Another similar error we get is:

OpenSSL SSL_read: Connection was reset, errno 10054

Is this a known issue? Does anyone know what's wrong?

Best regards

Accepted answers

Mark C

Hi @Andrin Meier

Thank you for reaching out to the community.

Based on the error message you're getting, it seems that you're unable to connect to Bitbucket.org via port 443.
To verify this further, can you try to do a telnet command against Bitbucket.org?

telnet bitbucket.org 443

Also, would it be possible for you to confirm if you're able to access the site https://bitbucket.org/ in your browser?

Let me know how it goes.

Regards,
Mark C

All comments

Mark C

Hi @Andrin Meier

Thank you for reaching out to the community.

Based on the error message you're getting, it seems that you're unable to connect to Bitbucket.org via port 443.
To verify this further, can you try to do a telnet command against Bitbucket.org?

telnet bitbucket.org 443

Also, would it be possible for you to confirm if you're able to access the site https://bitbucket.org/ in your browser?

Let me know how it goes.

Regards,
Mark C

Andrin Meier

telnet works, visiting bitbucket.org in the browser works as well. We have also confirmed that it is not a firewall problem. The same problem appeared just today on a coworker's laptop without going through the firewall. This problem happens not only with HTTPS but also with SSH. It usually works after trying a few times. Is there something else we could check? It doesn't seem to be a problem on our end, unless it has something to do with our ISP?

Mark C

Hi @Andrin Meier

Got it.

Could you check if you're connecting to Bitbucket.org through an IPv6 connection?

You can check this by cloning your repository with the debug commands below:

Git Bash / Linux:

GIT_TRACE_PACKET=1 GIT_TRACE=1 GIT_SSH_COMMAND="ssh -v" GIT_CURL_VERBOSE=1 git clone <your repository URL>

Find the specific log about:

* Connected to bitbucket.org (SOME_IP_HERE) port 443 (#0)

SOME_IP_HERE could be IPv4 or IPv6 format

If you're connecting via IPv6, can you try enforcing the Ipv4 connection instead by adding the flag --ipv4 in your Git commands?

E.g.

git clone --ipv4 <some repo URL>
git push --ipv4

Let me know how it goes.

Regards,
Mark C

Andrin Meier

I've run your command and it looks like we're already connecting through IPv4 unfortunately. Is there anything else we could try?

Welcome!

It looks like you're new here. Sign in or register to get started.

Quick Links

Find more posts tagged with

cloud

bitbucket

bitbucket-cloud

atl-gruland