Jack Brickey Expert

Is that a custom field? You can use automation. Trigger on issue updated and then use a condition to check and if your name is in people involved if so add to watch your list and include yourself. In this way any future updates to that issue you will get notifications on assuming that the notification scheme sends out…

Ok then try this…. project = abc and issueLinkType = “change”

TMP = Projeto Gerenciado por Equipe. No canto inferior esquerdo da tela, você deve ver o tipo de projeto que está usando. É um projeto gerenciado por equipe ou um projeto gerenciado pela empresa. compartilhe uma captura de tela do que você vê ao acessar as configurações do seu projeto. Acredito que você tenha um campo que…

If you use project = projectA AND… that should not be the case. You should only receive issues from projectA and are in an open sprint.

They are not the same thing… status category: to do, in progress, done (grey, blue, green) every status must fall within one of the three categories stauses can be defined by the admin. Often times you will have multiple statuses for a single status category. Some examples: * category of DONE: Done, Canceled, Rejected,…

What field in your issues would indicate that changes were the cause? Someone has to make that determination and subsequently update the issue to declare this. For example, let’s assume you create a custom drop down field, let’s call it Root Cause, and the user performs route calls analysis on the incident and determines…

Depends on some missing details… how about… project = 123 and sprint in opensprints()

And this is a software project right?

Unfortunately I don’t know of any way to disable this. The reason, likely already known to you, that you might receive the image you show above is that you have edited the basic workflow for the project and for business projects that becomes a problem. It would be nice if you could set the default board to one that you…

ok então eu acredito que você está trabalhando com um TMP, você pode confirmar? Assumindo que sim, clique nas configurações do projeto para o projeto específico e procure por suas categorias Campo ,. Acho que está associado aos seus tipos de problema, mas não tenho certeza. Lá você deve ser capaz de atualizar as categorias.

There is no way to import a single project. At least out of the box. You might check the marketplace for add-ons that would allow this.

For the first question ensure that the rule, that is the rule you show above can be triggered by another automation rule. There is a tick box when defining the rule. For the second question, yes you can certainly have a linked issue follow the status of the other issue. I haven’t set this up myself but it should be pretty…

@Henrik Edström , See if this helps… TMP CMP basically, if you have the necessary permissions then in the detailed issue view click on ellipses in upper right and select Delete.

você precisa editar o contexto e os valores do campo personalizado. presumindo que você seja um administrador Jira, clique no ícone de engrenagem no canto superior direito e selecione os problemas e os campos personalizados. Nessa tela, encontre o campo de seu interesse e clique nas reticências à direita. Selecione o…

If you have some good ideas you might wish to share them via the Feedback link within the application. My experience has been that they appreciate the feedback.

When issue was created it will start off in the initial status as defined by your workflow. If you want issue to be in a different status then you must transition it post create. So you could use automation to trigger on issue created and based on certain conditions transition issue to the desired status. regarding your…

Hi @Santiago Pelle , welcome to the community. I suggest using the feedback link in the app. This is posted as a question.

Sorry, your second bullet mentioned CMP as well. My poin is that while you can have an epic within a CMP consist of issues from different projects this is not the case for TMP. you cannot mix issues from different TMPs under an epic within a TMP

the above url resulted in 404 how-to-automatically-assign-issues-with-jira-software-automation 

As you note I used the manual trigger. Can you try changing your trigger to manual and see if you get the same results? If it fails again I think you’ve got something else going on. Do you have any conditions around setting the assignee? Can you manually set the assignee?

I don’t understand what you mean by reuse an epic. Epix or issues that contain stories or tasks. You can continue to add stories or tasks to your epic as long as you like. An epic can have stories/tasks from multiple projects in CMPs.

you need to use the branch rule here. This will ensure that your action to assign to one of the members of your group is done on the current issue that was just created. Here is what it should look like….

Is “cancelled” status in right-most column? 

I don’t think you can get to where are you want to be OOTB. You will need an add-on such as scriptrunner.

Two methods: * add to a public comment - The customer will then receive a link to the portal where they can view the document. * Send an email to the customer with the attachment - customer can open the attachment and saved to the desktop if they wish 

Ah yes and correct. 

I don’t understand what you mean by Jira Default group in relation to JSM portal. Is this a project you wish to hide?

I assume both projects are CMP projects. Please share your filter for the board. Also what status is the project two ticket in?

Yep, deleting users is a bad thing. You will need to recreate the dashboards. If you do happen to have a backup that was performed immediately prior to the user delete action and did not make other changes (new or updated issues, etc) then you could restore from backup as Nic mentioned. Please understand that when…

Yep, but no one asking this question ever has a backup in alignment with the instance in time just prior to deletion. 😜