Caroline R Atlassian Team

Hi, @Mark Joshua Abrenica! Thank you for reaching out to Atlassian Community! I checked our logs and confirmed that your email had a block on the server that prevented emails from being sent to your address. So, I removed your email from this suppression list. Could you please confirm if you receive the notifications now?…

Hi, Patrick! Thanks for the additional information. Checking the account you mentioned, I was able to see that this account is linked to a workspace that has been converted from a team account. Bitbucket has removed the ability to log in using a team account so that's why you are not being able to log in/link this account.…

Hi, @Jhonatan Teodoro! Welcome to the community! Yes, there is a way to config pipelines in order that a new trigger just starts if the previous one was completed :) Basically, you can now control the pipeline concurrency using Bitbucket deployments. By tracking your deployments using Bitbucket Deployments, Pipelines will…

Hi, @Michael DeStefano! Welcome to the community! I have reviewed your email and confirmed there was no blocker on your address that could be causing a problem to receive our emails. I also checked our internal logs and confirmed the emails have left our servers. In this case, I have sent you an invitation to one of my…

Hi, @ranzeplay! Thank you for reaching out to Atlassian Community! The bitbucket-pipelines.yml is the file that defines your Pipelines builds configuration, so it’s not possible to use pipelines in Bitbucket Cloud without a yml file. I hope this clarifies the situation, but please let me know if you have any questions.…

Hi, @ithryeandeus, It is not possible to use version 1 of API to create a repo, all endpoints have been removed with the exception of the ones I’ve listed. However, the API 2 works fine for me for repository creation with curl. Here is the request I have run: curl -X POST -u {username:password} -H "Content-Type:…

Hi, @Jumail Mundekkat! Thank you for reaching out to Atlassian Community! The "Bitbucket Cloud Migration Assistant" (often referred to as "BCMA") isn't quite ready yet but it is targeted for release in September or potentially October. We do recommend signing up for email updates via the above link if you're interested as…

Hi, @Ashwani Kumar Yadav! Welcome to the community! It’s not possible to set the Two-step verification on different devices because, in order to set the 2sv linked to your Bitbucket, you will need to scan a code from your Bitbucket account, however, if you have already set a device, when you access the page to scan the…

Hi, @Swatantra Saurabh! Welcome to the community! The “Something went wrong" message usually comes with a 5xx response that shows a Sentry ID code. This code may give us some indication of what is causing this issue. In this case, could you please follow the next steps to find the Sentry ID, so I can further investigate…

Hi, @Jay Guidos, Thanks for the additional details. Just to give you some context around the information we see on Git, the “author" field will show you the information that the user set on the .gitconfig file. However, when you have a Pull request on Bitbucket and you merge your code there, Git will show you the "Full…

Hi, @JonAM! Welcome to the community! I ran the GC against your repository and managed to reduce its size from 4.9 GB to 3.4 GB, which matches your local size. Just to give you some context around the GC process, Bitbucket triggers a garbage collection on the repository after each push, however aggressive GC is triggered…

Hi, @pingviek, I saw that you created a ticket with our support related to the same question, so to avoid any possible misunderstandings or miscommunication that may arise from discussing the same matter on two different platforms, let’s focus on the ticket instead. Once the ticket is resolved, feel free to share the…

Hi, @Himanshu Verma ! Welcome to the community! In order to change your username in Bitbucket, you can follow the next steps: * Click on your avatar and select Personal settings. * From the Account settings page, click change next to the Username. * Enter your new Bitbucket username. * Click Change. In case you receive a…

Hi, @Jader Yang! Thank you for reaching out to Atlassian Community! For now, if you merge the code in Bitbucket and there are conflicts, you’ll need to resolve them locally. We don’t have a way to automatically resolve conflicts when merging from the website. We do have the following feature request to add the ability to…

Hi, @Paul Phillips! Thank you for reaching out to Atlassian Community! After you transfer a repository, Bitbucket will send an email to the new owner or workspace administrators containing the transfer request with a link to the page that allows the user to accept or reject the transfer. When transferring a repository to a…

Hey, @Will Vachon! I'm glad to know this is working fine now! :) Answering your question, API calls will always require a password to authenticate. Kind regards, Caroline 

Hi, @TPNetwork! Welcome to the community! Could you give me more details about the problem you are facing when trying to link your bitbucket with an Atlassian account? Are you facing an error message when during this process? Please, feel free to share any additional information regarding this case. Thank you. Kind…

Hi, @Werner! Thank you for reaching out to Atlassian Community! Adding a user specifically to the repo and assigning him 'read only' permission will not overwrite the group 'dev' write permission, the user will still be able to write there. In this case, I would recommend you to create a new group without this user and…

Hi, @Jay Guidos! Thank you for reaching out to Atlassian Community! When you say that you "end up with a mash of commit authors in both firstname.lastname and Firstname Lastname format", are you referring to the list of commits on Bitbucket UI or on Git? Thank you! Kind regards, Caroline 

Hi, @Will Vachon! Welcome to the community! I tested this on my side and was able to update the repository variable using this curl request. These are the steps I have followed: * First, I ran the request below to find the repository level variables (variable_uuid): curl -X GET -u user_name:password…

Hi, @adrianklimczak, Thank you for reaching out to Atlassian Community! I ran the GC against your repository and managed to reduce its size. To give you some context around the git GC process, Bitbucket triggers a garbage collection on the repository after each push, however aggressive GC is triggered by GIT once the…

Hi, @jasmc, welcome to the community! I saw that you created a ticket with our support related to the same question, so to avoid any possible misunderstandings or miscommunication that may arise from discussing the same matter on two different platforms, let’s focus on the ticket instead. Once the ticket is resolved, feel…

Hi, @ithryeandeus, Thank you for reaching out to Atlassian Community! Just to give you some context around our API, our old rest API 1.0 use to include endpoints that would allow these sorts of operations, however, the 1.0 API has been deprecated with the intent that the 2.0 API would be a direct replacement. With that…

Hi, @Андрей Соколовский! Welcome to the community! I confirmed you were an admin of the workspace that you accidentally deleted the admin group. In this case, I recreated the group and added you there again. Could you please confirm if everything is working as expected now? Kind regards, Caroline

Hi, @cntt-antbot! Welcome to the community! I checked our logs and confirmed that your email had a block on the server that prevented emails from being sent to your address, so that's the reason you didn't receive these emails. This can occur when the system tries to send an email and the account does not exist yet, it's…

Hi, @Jun Takaba, I'm afraid this is a known issue on Bitbucket Cloud. Currently, Bitbucket Cloud supports only the UTF-8 format. As a result, it will treat files with other encoding formats as a UTF-8 format, that's why you're seeing the garbled or byte text in your encoded file. We have the below feature request to allow…

Hi, Joseph! Thanks for getting back to me! In this case, I would like to ask you to monitor this for a few weeks and let me know how it goes. Thank you. Kind regards, Caroline

You are welcome! I'm glad to help! :) Kind regards, Caroline

Hi, @Shane McNamara! Thanks for getting back to us and for providing the additional details. In order to further investigate this issue, we'll need to analyze this YAML, so I created a ticket on your behalf to our team. You should receive an email with this info and we'll contact you to work on this case. Please let me…

Hi, Kuti! Thanks for getting back to me! I ran the GC again and managed to reduce the repo size from 3.9 GB to 1.6 GB :) Please let me know if you have any questions. Kind regards, Caroline