nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

could not read from remote repository

robertolo

Hi,

I am going today through connectivity problems to my bitbucket repositories. It does not seem a client issue as I can reproduce the same problem in my two machines. Neither an internet connection problem on my side, as I can reproduce through two different networks (home connection and cell phone tethering).

The sympthoms are as follow:

$ git pull
Enter passphrase for key '/home/roberto/.ssh/id_bitbucket': 
Connection to bitbucket.org closed by remote host.
fatal: Could not read from remote repository.

Please make sure you have the correct access rights
and the repository exists.

Same exact message in both machines. I have tried the following also:

$ ssh -v git@bitbucket.org
OpenSSH_7.6p1 Ubuntu-4ubuntu0.1, OpenSSL 1.0.2n 7 Dec 2017
debug1: Reading configuration data /home/roberto/.ssh/config
debug1: /home/roberto/.ssh/config line 1: Applying options for bitbucket.org
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 19: Applying options for *
debug1: Connecting to bitbucket.org [18.205.93.2] port 22.
debug1: Connection established.
debug1: identity file /home/roberto/.ssh/id_bitbucket type 0
debug1: key_load_public: No such file or directory
debug1: identity file /home/roberto/.ssh/id_bitbucket-cert type -1
debug1: Local version string SSH-2.0-OpenSSH_7.6p1 Ubuntu-4ubuntu0.1
debug1: Remote protocol version 2.0, remote software version conker_1.1.17-9953920 app-130
debug1: no match: conker_1.1.17-9953920 app-130
debug1: Authenticating to bitbucket.org:22 as 'git'
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: algorithm: curve25519-sha256@libssh.org
debug1: kex: host key algorithm: ssh-rsa
debug1: kex: server->client cipher: chacha20-poly1305@openssh.com MAC: <implicit> compression: none
debug1: kex: client->server cipher: chacha20-poly1305@openssh.com MAC: <implicit> compression: none
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug1: Server host key: ssh-rsa SHA256:zzXQOXSRBEiUtuE8AikJYKwbHaxvSc0ojez9YXaGp1A
debug1: Host 'bitbucket.org' is known and matches the RSA host key.
debug1: Found key in /home/roberto/.ssh/known_hosts:31
debug1: rekey after 134217728 blocks
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: rekey after 134217728 blocks
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug1: Authentications that can continue: publickey
debug1: Next authentication method: publickey
debug1: Offering public key: RSA SHA256:KwjrafCTA0P4mDiNqNztGEmmYkpdcGN633rHnL81AEM /home/roberto/.ssh/id_bitbucket
debug1: Server accepts key: pkalg ssh-rsa blen 279
debug1: Authentication succeeded (publickey).
Authenticated to bitbucket.org ([18.205.93.2]:22).
debug1: channel 0: new [client-session]
debug1: Entering interactive session.
debug1: pledge: network
debug1: Sending environment.
debug1: Sending env LC_MEASUREMENT = es_ES.UTF-8
debug1: Sending env LC_PAPER = es_ES.UTF-8
debug1: Sending env LC_MONETARY = es_ES.UTF-8
debug1: Sending env LANG = en_US.UTF-8
debug1: Sending env LC_NAME = es_ES.UTF-8
debug1: Sending env LC_ADDRESS = es_ES.UTF-8
debug1: Sending env LC_NUMERIC = es_ES.UTF-8
debug1: Sending env LC_TELEPHONE = es_ES.UTF-8
debug1: Sending env LC_IDENTIFICATION = es_ES.UTF-8
debug1: Sending env LC_TIME = es_ES.UTF-8
debug1: channel 0: free: client-session, nchannels 1
Connection to bitbucket.org closed by remote host.
Connection to bitbucket.org closed.
Transferred: sent 3468, received 1640 bytes, in 20.1 seconds
Bytes per second: sent 172.4, received 81.5
debug1: Exit status -1

I do not know how to continue from this point. Any hints?

Thanks in advance.

Accepted answers

robertolo

Today this problem just disappeared from all my devices. I am able to pull, push, clone, etc. without problem. Flush! Server side problem + fix, I guess. That's fine.

BUT

How does Atlassian ever want to make the community engaged with their products with such service bumps? Two weeks! I even had to create a git server at home to be able to continue work. I am sure that I was not the only one with this problem, my setup is simple (standard git + openssh).

The worst part was the feeling that nobody really cared about this issue. That I would not even be able to clone my git repos (and maybe move somewhere else).

Thank you for the fix, but my trust on bitbucket has got much weaker after this issue.

Scott Dudley [Cenote]

At least in the situation where there is a "broken pipe" error message like this:

Cloning into 'reponame'...
packet_write_wait: Connection to a.b.c.d port 7089: Broken pipe
fatal: Could not read from remote repository.

Please make sure you have the correct access rights
and the repository exists.

I was able to get this to work by adding the following to the ~/.ssh/config file on the client machine:

IPQoS=throughput

For what it is worth, the client was a VM guest. For some of the other people that experienced issues only when using/not using a VPN, maybe this might be relevant too.

All comments

Ana Retamal

Hi Roberto!

Is your SSH correctly added to your SSH agent? You can check that by running the following command on your terminal:

ssh-add -L

If your key is not there, you can add it by doing:

ssh-add <path_to_key>

If your key is there, you can check if it's associated to the right Bitbucket account by running:

ssh -Tv gitbitbucket.org

If all the above seems to be ok, can you try to pull over https instead of ssh and tell us if you till get an error?

Let us know!
Ana

robertolo

Hi Ana, thanks for your answer,

The ssh key seems to be correctly added to the ssh agent, but still bitbucket.org is kicking me out without any further explanation...

$ ssh-add -L
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQ ... WwksXHHvXIFbIp /home/roberto/.ssh/id_bitbucket


$ cat ~/.ssh/config 
Host bitbucket.org
 HostName bitbucket.org
 PreferredAuthentications publickey
 IdentityFile ~/.ssh/id_bitbucket


$ ssh -Tv git@bitbucket.org
OpenSSH_7.6p1 Ubuntu-4ubuntu0.1, OpenSSL 1.0.2n 7 Dec 2017
debug1: Reading configuration data /home/roberto/.ssh/config
debug1: /home/roberto/.ssh/config line 1: Applying options for bitbucket.org
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 19: Applying options for *
debug1: Connecting to bitbucket.org [18.205.93.1] port 22.
debug1: Connection established.
debug1: identity file /home/roberto/.ssh/id_bitbucket type 0
debug1: key_load_public: No such file or directory
debug1: identity file /home/roberto/.ssh/id_bitbucket-cert type -1
debug1: Local version string SSH-2.0-OpenSSH_7.6p1 Ubuntu-4ubuntu0.1
debug1: Remote protocol version 2.0, remote software version conker_1.1.17-9953920 app-155
debug1: no match: conker_1.1.17-9953920 app-155
debug1: Authenticating to bitbucket.org:22 as 'git'
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: algorithm: curve25519-sha256@libssh.org
debug1: kex: host key algorithm: ssh-rsa
debug1: kex: server->client cipher: chacha20-poly1305@openssh.com MAC: <implicit> compression: none
debug1: kex: client->server cipher: chacha20-poly1305@openssh.com MAC: <implicit> compression: none
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug1: Server host key: ssh-rsa SHA256:zzXQOXSRBEiUtuE8AikJYKwbHaxvSc0ojez9YXaGp1A
debug1: Host 'bitbucket.org' is known and matches the RSA host key.
debug1: Found key in /home/roberto/.ssh/known_hosts:31
debug1: rekey after 134217728 blocks
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: rekey after 134217728 blocks
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug1: Authentications that can continue: publickey
debug1: Next authentication method: publickey
debug1: Offering public key: RSA SHA256:KwjrafCTA0P4mDiNqNztGEmmYkpdcGN633rHnL81AEM /home/roberto/.ssh/id_bitbucket
debug1: Server accepts key: pkalg ssh-rsa blen 279
debug1: Authentication succeeded (publickey).
Authenticated to bitbucket.org ([18.205.93.1]:22).
debug1: channel 0: new [client-session]
debug1: Entering interactive session.
debug1: pledge: network
debug1: Sending environment.
debug1: Sending env LC_MEASUREMENT = es_ES.UTF-8
debug1: Sending env LC_PAPER = es_ES.UTF-8
debug1: Sending env LC_MONETARY = es_ES.UTF-8
debug1: Sending env LANG = en_US.UTF-8
debug1: Sending env LC_NAME = es_ES.UTF-8
debug1: Sending env LC_ADDRESS = es_ES.UTF-8
debug1: Sending env LC_NUMERIC = es_ES.UTF-8
debug1: Sending env LC_TELEPHONE = es_ES.UTF-8
debug1: Sending env LC_IDENTIFICATION = es_ES.UTF-8
debug1: Sending env LC_TIME = es_ES.UTF-8
debug1: channel 0: free: client-session, nchannels 1
Connection to bitbucket.org closed by remote host.
Transferred: sent 3136, received 1640 bytes, in 20.5 seconds
Bytes per second: sent 153.2, received 80.1
debug1: Exit status -1


$ git pull
Connection to bitbucket.org closed by remote host.
fatal: Could not read from remote repository.

Please make sure you have the correct access rights
and the repository exists

Also, the SSH key seems to be already included in my bitbucket.org settings...

This really happened from one day to the next one. All repositories which I had been using since years ago, suddenly became unreachable without me touching the ssh config at all (in my two computers at the same time). Do you have any further idea? Thanks :-)

Regards,

Roberto

robertolo

Today this problem just disappeared from all my devices. I am able to pull, push, clone, etc. without problem. Flush! Server side problem + fix, I guess. That's fine.

BUT

The worst part was the feeling that nobody really cared about this issue. That I would not even be able to clone my git repos (and maybe move somewhere else).

Thank you for the fix, but my trust on bitbucket has got much weaker after this issue.

Ana Retamal

Hi Roberto,

Did you use sudo? This is a very common mistake and is explained here.

If that's not your case:

Did you already navigate to your repo directory before the pull?
For troubleshooting purposes, have you tried HTTPS instead of SSH?
Can you confirm you have the right permissions for the repo you're trying to pull?

Let us know!

Ana

robertolo

Hola Ana,

Thank you for your answer. Some post-mortem answers:

sudo: not.
Yes, I had cloned/pulled/pushed to all these repositories before the incident.
I really cannot remember if I tried HTTPS, I guess I did. 2 weeks of downtime and desperation are enough to try many options.
Yes, I had the right permissions. I am the owner, basically. I double checked that my SSH key was properly set up here and in server, as you can see in the logs above ("debug1: Authentication succeeded (publickey)").

Luckily now my repos are back to normal as I posted before.

Kind regards,

Roberto

Pablo Demian

Same problem here

Authenticated to bitbucket.org ([18.205.93.2]:22).
debug1: channel 0: new [client-session]
debug1: Entering interactive session.
debug1: pledge: network
debug1: channel 0: free: client-session, nchannels 1
Connection to bitbucket.org closed by remote host.
Transferred: sent 2520, received 1580 bytes, in 0.0 seconds
Bytes per second: sent 53653025.8, received 33639595.5
debug1: Exit status -1

philmill

I don't have an answer but I'm having the exact same issue. I can fetch from a Bitbucket repo from my office network, but when I get home I get the same error as reported.

fatal: Could not read from remote repository.
Please make sure you have the correct access rights

Running `ssh -Tv git@bitbucket.org` I can confirm that succeeds from the following

debug1: Authentication succeeded (publickey).

Authenticated to bitbucket.org ([2406:da00:ff00::6b17:d1f5]:22).

Super mysterious. I use the same SSH keys on GitHub just fine from home and office so my SSH client is working.

macOS 10.14.5

git version 2.22.0

openssl: stable 1.0.2s (bottled) [keg-only]

ssh -V reports "OpenSSH_7.9p1, LibreSSL 2.7.3"

eagleas

Same problem!

```
debug1: Authentication succeeded (publickey).
Authenticated to bitbucket.org ([18.234.32.155]:22).
debug1: channel 0: new [client-session]
debug1: Entering interactive session.
debug1: pledge: network
debug1: Sending environment.
debug1: Sending env LC_ALL = en_US.UTF-8
debug1: Sending env LANG = ru_RU.UTF-8
debug1: Sending env LC_CTYPE = UTF-8
debug1: channel 0: free: client-session, nchannels 1
Transferred: sent 2772, received 1640 bytes, in 10.1 seconds
Bytes per second: sent 273.6, received 161.9
debug1: Exit status -1
```

When I use VPN - all OK. What the problem?

eagleas

Retring ssh -Tv git@bitbucket.org to another IP from list:

$ host bitbucket.org
bitbucket.org has address 18.234.32.157
bitbucket.org has address 18.234.32.156
bitbucket.org has address 18.234.32.155

with another result:

----

debug1: Authentication succeeded (publickey).
Authenticated to bitbucket.org ([18.234.32.157]:22).
debug1: channel 0: new [client-session]
debug1: Entering interactive session.
debug1: pledge: network
debug1: Sending environment.
debug1: Sending env LC_ALL = en_US.UTF-8
debug1: Sending env LANG = ru_RU.UTF-8
debug1: Sending env LC_CTYPE = UTF-8
logged in as eagleas

You can use git or hg to connect to Bitbucket. Shell access is disabled
debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
debug1: channel 0: free: client-session, nchannels 1
Transferred: sent 2772, received 1832 bytes, in 0.3 seconds
Bytes per second: sent 10890.2, received 7197.3
debug1: Exit status 0
----

debug1: Authentication succeeded (publickey).
Authenticated to bitbucket.org ([18.234.32.156]:22).
debug1: channel 0: new [client-session]
debug1: Entering interactive session.
debug1: pledge: network
debug1: Sending environment.
debug1: Sending env LC_ALL = en_US.UTF-8
debug1: Sending env LANG = ru_RU.UTF-8
debug1: Sending env LC_CTYPE = UTF-8
debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
logged in as eagleas

You can use git or hg to connect to Bitbucket. Shell access is disabled
debug1: channel 0: free: client-session, nchannels 1
Transferred: sent 2772, received 1832 bytes, in 0.3 seconds
Bytes per second: sent 10967.8, received 7248.6
debug1: Exit status 0

----

and again .155:

debug1: Authentication succeeded (publickey).
Authenticated to bitbucket.org ([18.234.32.155]:22).
debug1: channel 0: new [client-session]
debug1: Entering interactive session.
debug1: pledge: network
debug1: Sending environment.
debug1: Sending env LC_ALL = en_US.UTF-8
debug1: Sending env LANG = ru_RU.UTF-8
debug1: Sending env LC_CTYPE = UTF-8
packet_write_wait: Connection to 18.234.32.155 port 22: Broken pipe

It seems to me - problem with server on IP: 18.234.32.155. Please, look into this.
This problem exists for a long time.

Maze Hawks

This happens because the SSH key needs to be addressed to the user account, not the repository itself.

lapalmabynight

This is the solution!

fusion27

🔥️Cooking with gas🔥️

Matt R_ibducm

Wow you're right. I have had the same problem for months
https://community.atlassian.com/t5/Git-questions/Unable-to-access-repo-via-SSH-fatal-Could-not-read-from-remote/qaq-p/1075122

As soon as I connect to VPN, git ls-remote suddenly succeeds

Roberto López López

This was not the solution, this was checked from minute 1

Eloi Moreira Mendes

Worked for me! Thanks!

mkochco_sh1ifu

Same issue today Tues Nov 5. Hey Atlassian why is this happening?

Ben Winding

So this command

ssh -Tv gitbitbucket.org

Gives me:

logged in as benwinding

But trying to pull a repository, gives me

Please make sure you have the correct access rights
and the repository exists.

Any ideas?...

Ben Winding

I deleted the old keys and readded a new SSH key, now it works???

Scott Dudley [Cenote]

At least in the situation where there is a "broken pipe" error message like this:

Cloning into 'reponame'...
packet_write_wait: Connection to a.b.c.d port 7089: Broken pipe
fatal: Could not read from remote repository.

Please make sure you have the correct access rights
and the repository exists.

I was able to get this to work by adding the following to the ~/.ssh/config file on the client machine:

IPQoS=throughput

For what it is worth, the client was a VM guest. For some of the other people that experienced issues only when using/not using a VPN, maybe this might be relevant too.

iMakedonsky

Me too experiencing this issue now.

2 weeks ago everything worked, now it's broken. What the hell?
Didn't change my keys, debug recognizes me correctly, yet i still can't pull or push to same repository i worked with 2 weeks ago!

a2Xn1ahw5aw4rg

John Smith

Has this been solved yet Atlassian ? - this is a really hard to troubleshoot problem.

The SSH connection is fine, nothing is wrong with the keys (it accepts public key auth), please tell us why this is failing.

robertolo

I guess they know from the beginning, from time to time they have such service (long) hiccups.

My original question dates from over a year ago.

Apparently they just do not give a shit about free tier users. They don't realize that these free tier users could potentially become paying customers, and they are just building a very bad reputation.

John Smith

The thing is - this doesn't just affect free tier users - this is effecting a bitbucket DC user.

mkochco_sh1ifu

We experienced this issue and finally tracked it down to an issue with IP QoS settings. I don't think this has anything to do with Bitbucket. Instead it has everything to do with the route you take to Bitbucket and how the default SSH client IP QoS exposes issues with certain network equipment. We worked around the issues by adding the following to `/etc/sshd/ssh_config`

Host *
IPQoS 0x00

robertolo

Very good, thanks - first reasonable answer in the whole thread. Unfortunately I cannot check this any more, I hope this could help others.

I have read somewhere else, that `IPQoS=throughput` can be also helpful.

robertolo

look at mkochco answer further down this thread - may work for you

Marcello Verona

I resolved with this simple trick

Remove the SSH key from the repo. (Click on repo name > Settings > Access Keys)
Add SSH key to Account settings SSH keys. (Click on your avatar > Bitbucket Settings > SSH Keys)

(found on StackOverflow: https://stackoverflow.com/questions/56828685/cant-git-push-to-bitbucket-unauthorized-fatal-could-not-read-from-remote-re/56828686#56828686).

Michael_Pierre

@Marcello Verona Thank you very much! Your answer solved my read-only error when trying to push to my bitbucket repo. I did infact save my public key in my repo's "Access key" setting, rather than my bitbucket account's "SSH key" settings. Deleting the key from the Access key and pasting it to SSH key settings resolved this issue.

Jerald S M

I'm facing a similar issue, since days

I'm working now with newly generated ssh-keys

ricardoPT

Actually I was having this problem on a Mac, after trying some solutions I just restarted the computer and BANNG... it worked fine again!

Hung_Doan_Sy

This works like a charm !!!

Jan P Springer

this is still going on. ssh keys are installed in the user profile. i can pull but not push, same mysterious error message.

rb_oh0zbp

Thanks a lot. This answer should be pin on top of the thread.

osroflo

This worked for me:

~/.ssh/config

Host bitbucket.org
Hostname bitbucket.org
User git
IdentityFile ~/.ssh/bitbucket_id_rsa
IdentitiesOnly yes

jalangle

This is what worked for me as it bypassed my agent forwarding and forced me to have the key local to the box. Not ideal, but it worked.

Guido Ortega

Thank you, this solves my problem.

Nate Cheng

This is really confusing when I have multiple project in github, bitbucket's different accounts.

I removed the SSH key from repo, but add SSH key into the account bucket setting, then it works fine.

tjcccc

Worked for me!

Thank you!

Siva Gannavarapu

I've multiple routers in my house. When i switched the WIFI to the new one, git wont push and gives me this error, but when connected to the old WIFI, and it works. Weird!

Platform : git bash - windows 10

frank.hoffsummer

I had the exact same problem, and after reading through this entire thread, none of the solutions offered here did it for me. After lots of trial and error, I found the solution for me

I have the public ssh key that I want to use with BitBucket configured on my bitbucket.org account page https://bitbucket.org/account/settings/ssh-keys/

The version of my ~/.ssh/config file that didn't work for me looked like this

Host *
    IdentityFile ~/.ssh/id_rsa
    IdentitiesOnly yes
    UseKeychain yes
    AddKeysToAgent yes
    Compression yes
    StrictHostKeyChecking no
    ForwardAgent yes
    ForwardX11 no
    ServerAliveInterval 600

Host bitbucket.org
    HostName bitbucket.org
    User git
    IdentityFile ~/.ssh/id_rsa_bitbucket

so I have one key that I want to use as default (~/.ssh/id_rsa configured in "Host *" section) and another that I want to use with BitBucket (~/.ssh/id_rsa_bitbucket configured in "Host bitbucket.org" section)

While this setup is working with any other site I need to use git or ssh with (e.g. github.com), it doesn't with Bitbucket. So removing the first default key (~/.ssh/id_rsa configured in "Host *" section) did the trick. The working ~/.ssh/config file now looks like this

Host *
    IdentitiesOnly yes
    UseKeychain yes
    AddKeysToAgent yes
    Compression yes
    StrictHostKeyChecking no
    ForwardAgent yes
    ForwardX11 no
    ServerAliveInterval 600

Host bitbucket.org
    HostName bitbucket.org
    User git
    IdentityFile ~/.ssh/id_rsa_bitbucket

unknown

Ah finally, after days of struggling with this issue, this solution works. Thank you!

myzticman

This also resolved my problem. Thanks @mkochco

markwilx

I’m having the same problem right now, also for days. I was working along just fine with my repository. A little more than a week ago, it stopped working. I got a notice from Atlassian that bitbucket was having problems. The next day, my repository was working fine again. A couple days after that, it stopped working again (no notice this time). It’s been several days now, and I still can’t write to [edit: or read from] my repository.

As robertolo surmised, this is probably a server side error.

Mark

Update: I did as Scott Dudley _Cenote_ suggested (below) and installed new SSH keys. This did not solve the problem. However, in troubleshooting, I did discover that the command

ssh -T git@bitbucket.org

Produced the error “Connection closed by [IP address] port 22” whenever I was connected to my VPN (specifically, NordVPN). When I was not connected to my VPN, the command produced the expected output indicating I was logged in by my username. Thus, I can conclude my SSH keys are now working properly.

However, attempts to push my code updates, even when my VPN is disconnected, produce the error message, “Connection to bitbucket.org closed by remote host. fatal: the remote end hung up unexpectedly”

I’ll keep updating here until resolved.

kjetilsk

Thanks! I'm in a VM too. This worked for me:

export GIT_SSH_COMMAND="ssh -o IPQoS=throughput -i /home/USERNAME/.ssh/id_rsa_bitbucket"
git clone ssh://USERNAME@bitbucket.org/WORKSPACE/REPO.git

paulmspex

I had an issue similar to frank_hoffsummer's problem.

I found the problem to be that I have multiple identities on bitbucket.org, and different ssh keys associated with each one. The clue was noticing the result of doing `ssh -T git@bitbucket.org`. The response that I got was

plsuh@Paul-MacBook-Air ~ % ssh -T git@bitbucket.org
logged in as paul_suh

You can use git to connect to Bitbucket. Shell access is disabled
plsuh@Paul-MacBook-Air ~ %

Note the username that I highlighted in bold. That was the wrong account on bitbucket.org for the repository I was trying to push to.

The ssh keys are added to ssh-agent in a non-deterministic order for each time that you log in to your local machine (unless you do something special). As a result, sometimes the key for one account was tried first, at other times the key for a different account was tried first. Each login succeeded, but one account didn't have the correct access rights while the other one did.

I solved the immediate problem by removing all but one key from ssh-agent.

In the long run, I will need to set up something like the solutions in this Stack Overflow question:

https://stackoverflow.com/questions/6688655/select-private-key-to-use-with-git

In particular, ignore the "accepted" answer and look at the one below it by Richard Smith.

Sadat Hussain_33o2qx

It resolved for me after connecting to VPN

bqliu93

A lot of mis-configurations can result in this issue. For me for example, I moved my repo from one workspace to another so the git url of the repo changed. I initially forgot to updated the remote url in my local repository, and the same error popped up when I tried to push.

After updating the remote url then everything worked again.

Cole Tierney_3r0o6s

Thank you! Removing the default entry `IdentityFile ~/.ssh/id_rsa` from `Host *` solved this problem for me.

Welcome!

It looks like you're new here. Sign in or register to get started.

Quick Links

Find more posts tagged with

bitbucket

bitbucket-cloud

atl-gruland

git

ssh