nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

cyclic service desk sla goals

Flavius Nopcea

what happens/how is sla calculated for issues when the goal in each cla depends on the other sla?

for example I have 2 slas:

time to resolution. this has only 1 goal defined as follows: priority = Blocker and "Time waiting for support" > 30m

time waiting for support. this has 1 goal defined as follows: priority = Blocker and "Time to resolution" < 30m

now: when I create a new issue in the associated project and I put the priority as 'Blocked' how is the sla calculated for this issue. because the goals for each sla depends on the other sla?

jira displays some values on the view issue page but I do not know how those are calculated!

please help!

Accepted answers

Judd

Hi Flavius,

The goals for each SLA metric are calculated independantly. This means you can have multiple SLAs that apply to a single issue.

For example, you might have a 'Time to Resolution' goal for priority=Blocker of 4 hours and a 'Time waiting for Support' goal for priority=Blocker of 1 hour. Each Blocker issue will have both SLAs applied.

All comments

Eduardo Marques

Dear Flavius,

Could you please provide more details regarding each SLA's Start, Pause on and Stop settings?

Best regards,

Flavius Nopcea

both SLAs have start condition: issue created

time to resolution has stop condition: resolution set

time waiting for support stop condition: resolution set OR assignee: changed

both SLAs do not have pause conditions

I know it doesn't make so much sense. I am in the process of defining the SLAs but I do not know how JIRA calculates the SLAs when the SLAs depend on each other!

Judd

Hi Flavius,

The goals for each SLA metric are calculated independantly. This means you can have multiple SLAs that apply to a single issue.

Flavius Nopcea

I understand that the SLAs are calculated independently BUT in my example each SLA has only ONE goal and the goal of each SLA depends on the value of the other SLA

SLA 1 -> 1 goal -> depends on SLA 2

SLA 2 -> 1 goal -> depends on SLA 1

how is the sla calculated for a new issue? when JIRA tries to calculated SLA 1 it will look to the goal associated with it and see if the issue matches the goal. How is this possible when the goal depends on SLA 2. Also SLA2 depends on SLA1.

This is what puzzles me! Thanks

Eduardo Marques

Flavius, in the mentioned SLAs what's the goal time for all the remanining issues (aside from the ones picked up by your query)? For me it seems strange that the SLA 1 is running the way you want because at the moment of start, the SLA2 hasn't started yet.

Flavius Nopcea

I did not have defined a value for all the remaining issues. Yes, also to me it's strange because Jira allows me to define such SLAs and even more: when I look to new issues created that maches the goals I see time values for both SLAs.

I do not understand how the SLAs are calculated in this case! And I will be dealing with situations when one SLA must depend on the other. I do not see how they can be calculated independently in this case.

Flavius Nopcea

Any ideas?

Eduardo Marques

Hey Flavius,

Could you please add a screenshot of the SLA working at same time and also the settings for each SLA?

Thank you

Flavius Nopcea

Hello Eduardo,

here you can see 3 images:

http://imgur.com/FIErYGd,UlKXizt,OtVcOaB#0

you will see the definition of each sla and a new issue created!

Judd

Right, I see what you mean. In this case neither goal would be applied because at the point of issue creation when the trigger event fires, there is no value set for either SLA.

I'm unsure why both SLAs show up for you - I just tested this on the lastest build of Service Desk and the goals aren't applied.

Out of curiosity what are you trying to achive with this SLA setup?

Eduardo Marques

It's indeed strange that the SLAs started.

It seems that the "time waiting for support" starts because the "time to resolution" is smaller than 30min (maybe the system considers the fact that the time to resolution hasn't started equals to 0 (zero) so smaller than 30min).

When you create a new ticket are both SLAs immediately initiated?

Would it be possible to change the query of the "time waiting for support" and test again?

priority = Blocker and "time to resolution" > 30m

Thank you

Flavius Nopcea

I have updated the service desk plugin. now when I edit the slas, just put some more spaces characters in the goals (just to trigger the recalculation of the sla) when it asks me to recalculate I say ok but the the process hangs.

what I did is the following: I removed the cyclic dependency. so now only sla 1 depends on sla 2 but sla 2 does not depend on sla 1.

when I create a new issue now I see only the value of sla 2.

so my conclusion is: sla goal definition does not support dependecy on other sla.

is this correct? can you please confirm this?

Flavius Nopcea

yes, I also updated the service desk plugin and I see that the slas do not appear anymore on the view issue page. my conclusion is that sla goal definition does not support expression like 'sla1 > 30m' so one sla could not depend on other sla.

can you please confirm this? (it's strange though because in the goal autocomplete displayed values I see the names of the slas. if this is not supported those values should not pop up in the autocomplete)

I need this setup for my organization.

Welcome!

It looks like you're new here. Sign in or register to get started.

Quick Links

Find more posts tagged with

jira-service-desk