A few months ago I upgraded my Windows 7 machine to Windows 10 (on a vm running vmWare fusion on Mac OSX). I had the current version of Source tree at the time (which I believe is 1.6.22). Every time an update became available, the installer would start then give me the message "The older version of SourceTree cannot be removed. Contact your technical support group." I just ignore updates for a time till I finally needed the newer updates and wasn't able to install one. So far I've tried: * Downloading the newest install and running it. I got the same message * I would follow the step here: "The older version of SourceTree cannot be removed" but the recommended tool does not exist for Windows 10 * Removing the folders and registry keys recommended here: http://www.advanceduninstaller.com/SourceTree-21492036f47cd208ec5b38b09c675f22-application.htm and here: http://www.uninstallapp.com/article/How-to-uninstall-Source-Tree-1.0.0.1.html (I know they look like shady sites, but I was careful) * Searching computer for all remains of Atlassian, SourceTree and PuttyGen. * After deleting all files, emptying recycle bin * Restarting computer after steps All those steps to no avail. It still won't install SourceTree. What else should I do? Anyone else having this problem?

nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

[Windows 10] Source tree won't update or install (the older version of SourceTree cannot be removed)

BenJBailey

A few months ago I upgraded my Windows 7 machine to Windows 10 (on a vm running vmWare fusion on Mac OSX). I had the current version of Source tree at the time (which I believe is 1.6.22).

Every time an update became available, the installer would start then give me the message "The older version of SourceTree cannot be removed. Contact your technical support group."

I just ignore updates for a time till I finally needed the newer updates and wasn't able to install one. So far I've tried:

Downloading the newest install and running it. I got the same message
I would follow the step here: "The older version of SourceTree cannot be removed" but the recommended tool does not exist for Windows 10
Removing the folders and registry keys recommended here: http://www.advanceduninstaller.com/SourceTree-21492036f47cd208ec5b38b09c675f22-application.htm and here: http://www.uninstallapp.com/article/How-to-uninstall-Source-Tree-1.0.0.1.html (I know they look like shady sites, but I was careful)
Searching computer for all remains of Atlassian, SourceTree and PuttyGen.
After deleting all files, emptying recycle bin
Restarting computer after steps

All those steps to no avail. It still won't install SourceTree. What else should I do? Anyone else having this problem?

Accepted answers

BenJBailey

Turns out that there was something wrong with the install (I did have it installed on Windows 7 previously before I upgraded). After running CCleaner, the new version installed no problem.

All comments

minnsey

Hi,

Its probably worth you creating a support ticket at https://support.atlassian.com.

It seems the installer is failing before SourceTree itself every runs. To provide some additional information Could you try running the installer with logging turned on? e.g.

{code}
.\SourceTreeSetup_1.6.23.exe /L*v log.txt
{code}

And then upload the log.txt tot he support ticket?

It might also be useful to record the process using Windows' Problem Steps Recorder http://windows.microsoft.com/en-US/windows7/How-do-I-use-Problem-Steps-Recorder and attaching the generated screenshots.

Thanks

BenJBailey

Well, turns out that running CCLeaner was all I needed to do to get this working

agilerank

It look me a long time to figure out on Windows 10 especially after trying to mess with the registry values and deleting anything Atlassian related, but looking at the logs generated by Michael's suggestion above, I thought to find the exact same version that was previously installed (indicated by the logs, luckily). By using the matching installation package and repairing, I was able to accomplish both uninstalling the old corrupted version and installing the latest.

BenJBailey

Turns out that there was something wrong with the install (I did have it installed on Windows 7 previously before I upgraded). After running CCleaner, the new version installed no problem.

IgorYastrebov

CCleaner cannot fix reg corruption.

In many cases, the problem is with MSI registry - corrupted reg.

Here is the only tool can fix corrupted MSI registry: https://support.microsoft.com/en-gb/mats/program_install_and_uninstall/en

Dany Ellement

So if you are like me, and tried to uninstall sourcetree manually without any success and failed at installing the latest version here is the solution:

Download the lastest sourcetreesetup eg. SourceTreeSetup_1.8.3.exe
Then, using command line, run [PATH TO SETUP]\SourceTreeSetup_1.8.3.exe /L*v log.txt
open the log file, locate your previous version # ... tips: search for SourceTreeSetup_ and once your found the version # that is lower than the current one, copy it.
In the browser download the previous using the following url: https://downloads.atlassian.com/software/sourcetree/windows/SourceTreeSetup_x.x.xx.exe (where offcourse x.x.xx = your previously installed version #)
Install the previous version
Then finally install the latest version

Thanks Robert!

Dany Ellement

Thanks! Your solution worked perfectly, i posted the exact step , with link to installation package.

naneutral

Best answer. Works 100%.

jovaniogaya

I'm using windows 10 and here's what I did:

Go to

C:\Users\user\AppData\Local\Atlassian

Delete or rename all existing folders in it.

Then run the installer

sreejithk2000

This worked for me. Thank you.

jovaniogaya

nice to hear

thiagopxp

It worked for me as well.

Ryne Rayburn

Has anyone experienced issues with v2.3.1 on Windows 10? I can install v2.1.11 fine but when I move to v2.3.1 it will never load. A peer of mine has it working fine on Windows 7. Previously I have had older versions of 1.x.y, v2 betas, and v2.1.10 & older.

I have tried the above solutions in this article with nothing working. I've ran CCleaner, both disk & regedit cleanup. I've went to C:\Users\user\local... to remove the SourceTree & Atlassian folders. Nothing seems to allow me to run v2.3.1. I'm look for any advice here.

mustnecessity

Hi, I just ran into the same prolem with you, when I execute SourceTree Setup Exe, the exe run about 10 second and auto close.

Later I try other version installer here:

https://www.sourcetreeapp.com/download-archives

I dwonload 2.1.10.0 and install successfully.

mustnecessity

Hi, I just ran into the same prolem with you, when I execute SourceTree Setup Exe, the exe run about 10 second and auto close.

Later I try other version installer here:

https://www.sourcetreeapp.com/download-archives

I dwonload 2.1.10.0 and install successfully.

mredman

I cannot run this either, I am forced to try a previous version as productivity is getting lost.

mredman

To get the latest version working: 2.3.1.0 on Windows 10, I did the following.

I uninstalled SourceTree

Deleted everything in AppData\Atlassian

(running 2.3.1.0 just opened and closed)

Ran the installer 2.0.20.1

This came up with something about dictionaries, which I clicked delete
(I assumed I would have deleted these, but I didn't stop to look at the paths)

Then the installer wizard came up (for 2.0.20.1)

I closed the installer and opened the 2.3.1.0 installer and that continued.

Hope this helps..

Feedback, please test installers on non-clean machines that have had previous installs.

Ryne Rayburn

Thank you! This was my solution too!

Hadrien (old account)

Could not start SourceTree 2.3.1 on Windows10. After trying uninstalling/reinstalling with no improvement, editing the user.config file as described here fixed it for me: https://community.atlassian.com/t5/Sourcetree-questions/SourceTree-2-3-1-Windows-will-not-launch/qaq-p/643914

Monique Heinz

This was my solution too!

mredman

After posting the solution, SourceTree now doesn't open after a couple of days, very annoying... do I really need to do this every time?

Adrian Cigher

Sorry. The installer doesn't run at all. I looked for the log file assuming it's in the same folder as the setup file and I didn't find it.
But then again... I tried SourceTree 2.

minnsey

Hi Adrian,

Do you see a splash screen when the 2.x installer runs?
Are there any files in %localappdata%\Sourcetree\app-{version} ?

hollasch

This fixed it for me as well. Before this I tried cleaning the registry, uninstalling and reinstalling, and wiping the AppData/Local directories. Editing the config file as this post mentions finally did the trick.

Brian_h0hqer

Is there another solution that doesn't involve installing another 3rd party app?

Sudheer Nair

I was getting installation error on my new Window 10 laptop. Tried few things mentioned above but couldn't resolve the issue. Then ran one utility from Microsoft to cleanup the registry as suggested in Atlassian site: https://confluence.atlassian.com/sourcetreekb/the-installation-update-or-removal-of-sourcetree-is-not-successul-on-windows-735642921.html.

It worked!

TimH

I had to delete the folders SourceTree and Atlassian from c:\users\[username]\AppData\Local before I could install successfully.

Januar Simarmata

I have deleted both directory from but didn't work.

It turns out that the application was installed on c:\users\[username]\AppData\Local\SourceTree directory, so I just continue from there, i.e. create shortcut from Desktop.

David Storfer

My solution was related to WMI. If you go into Manage Computer under Services & Applications and right-click WMI Control -> Properties. If you see a failed message or other errors, this may be the issue. If you can't fix WMI the traditional ways described on the web, try this.

Go into dcomcnfg and try to look at the

Component services > computers > My computer > Dcom config

It may prompt you for classes not registered - Say Yes. Once I did that, my WMI properties were working again and SourceTree reinstalled perfectly.