nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

In User Macro Velocity - How to use ContentService like PageManager?

I see this post about How to use ContentService instead of PageManager?, which is great for when I need to use ScriptRunner.

But how do I do the same thing inside of a custom User Macro with Velocity?

I can't figure out how to do the Expansion part. There is no documentation.

I tried something like this, but I knew it would fail miserably, and did.

#set($contentFinder = $contentService.find(new Expansion('content'))

    .withPropertyKey($spaceKey)

    .withContentId($pageId)

    .fetch())

It should be a requirement before releasing a deprecation's replacement to document the crap out of the new class. This is so frustrating!

Does anybody have any ideas?

Accepted answers

All comments

Bill Bailey

Hello @WW , and welcom to the world of user macros -- so much power, so little documentation and support.

I have struggle whti this as well. Over the years, I have found macros from others much smarter than me, and then copied what they did. Not sure when I need to do this, but it does seems to make the methods I need work. ;-)

So on one of my complex macros, described in this article: A-Child-Page-by-Label-User-Macro , you will see early on in the macro as set of declarations:

#set( $containerManagerClass=$content.class.forName('com.atlassian.spring.container.ContainerManager') )
#set( $getInstanceMethod=$containerManagerClass.getDeclaredMethod('getInstance',null) )
#set( $containerManager=$getInstanceMethod.invoke(null,null) )
#set( $containerContext=$containerManager.containerContext )
#set( $pageManager=$containerContext.getComponent('pageManager') )

Do you need all of them? I am not smart enough to know, but now you get access to all of the page manager methods. You can look at the code in my article to see how to manulipulate the code to get what you need. For example:

$currentPage = $pageManager.getPage($content.id)

Now I will point you to this page as some of the objects are available by default:

https://confluence.atlassian.com/doc/user-macro-template-syntax-223906130.html#UserMacroTemplateSyntax-Objectsavailabletoyourmacro

Hi @Bill Bailey ,

I'm familiar with how to instantiate the classes/objects in Velocity.

I don't think I explained the initial problem very well. I had assumed the answerer would understand the problem by going to the link I provided, which is the solution for using the Java API for the same problem I'm having, but that was probably not so clear. So here goes again:

The problem is that the PageManager and ContentEntityManager classes both now have deprecated methods that are super useful in Confluence User Macros, such as the methods:

$pageManager.getPage(spaceKey, pageTitle)
$pageManager.getPage(Id)

$contentEntityManager.getById(Id)

However, the methods they've been replaced with are not typical, and there is no documentation on their syntax. Here's what they say:

ContentService.find(Expansion...) from plugins, or use PageManagerInternal in core where applicable

ContentService.find(Expansion...) for plugins, or use ContentEntityManagerInternal in core where applicable

As far as I know, any class with Internal at the end is only available to Atlassian staff, otherwise at least one of those might be useful. I don't know if the "for plugins" class/method would work in a User Macro. Seeing as how there are no examples provided and little documentation other than the structure, it's anybody's guess.

The link I provided to the other Community post I previously linked to did give the syntax for using the Java API, but I need to know the syntax in Velocity.

In particular, the Expansion part is the not so typical part, and I have no idea how to approach it in Velocity since Velocity doesn't really handle nested anything very well.

The Confluence objects accessible from Velocity page says that $pageManager is an object accessible from Velocity, but it doesn't mention anything about the deprecated method replacements being available.

I'm just saying they need to be consistent, remember they have multiple locations for documentation and multiple ways in which objects are used, and they need to update, update, update the documentation.

I understand one department probably works on the deprecation replacement code and somebody else does the documentation for this area and somebody else for that area, but they need some cohesion. That and examples.

Bill Bailey

Well if you understand how to properly instantion classes and methods, you are way ahead of me. ;-) I started my career with punch cards,, but never really learned programming beyond BASIC. ;-) And I am stuck on 6.13.23 for a ton of reasons.

And I am not sure you can make an API call that way within a user macro. I have never seen it done that way from within Velocity.

And again, welcome to the world of writing user macros, where trying to find good examples is really hard, and having to deal with Atlassian documentation being in many locations and incomplete. For example, is this page still accurate as it is over a year old?

https://developer.atlassian.com/server/confluence/confluence-objects-accessible-from-velocity/

First, I would assume that anything marked for plugins can be made to work (maninly because you can package user macros as a plugin). The rub is trying to figure out how. For your specific case, the documetnation for current version of DC still shows the $space object being available (I assume it is accurate). So the following should still work in DC 7.15:

$currentSpaceKey = $space.getKey()

And the doc linked on that page still shows .getkey as being current

https://docs.atlassian.com/atlassian-confluence/6.6.0/index.html?com/atlassian/confluence/spaces/Space.html

And I see there is a method <span><a href="https://docs.atlassian.com/atlassian-confluence/6.6.0/com/atlassian/confluence/spaces/Space.html#getDisplayTitle--" rel="noopener nofollow noreferrer" target="_blank">getDisplayTitle</a></span>()

And generally, even if a method says depricated, I try the dumb thing and test it out. I have found that atlassian is slow to actually remove depricated items.

And you can also bring classes and methods into the Velocity context, including your own java code:

https://developer.atlassian.com/server/confluence/velocity-context-module/

And let me direct you to another forum with lots of smart people https://community.developer.atlassian.com/

Another pro tip is to set up a plugin develop environment. While it is not intended to be used for user macro development, I have tested user macros within the environment as you get detailed syntax checking and some useful error messages from within the associated console -- very useful with complex macros.

One of the deprecated methods used to work but now it doesn't (no idea why). So that's why I'm trying to change the existing code.

The code doesn't necessarily use the space for the page the macro is in, so $space wouldn't work for this.

I'm already using external classes, too.

We're not allowed to setup much of anything where I work, without an act of nature/Congress/whatever or without opening a can of worms. I've tried.

I checked the developer community, too, but that forum is mostly for plugins. From what I found, they don't much like or understand the new style of the deprecation replacement either, but there was no mention of Velocity.

I guess I could try re-posting my question there if no one else here has any ideas.

Welcome!

It looks like you're new here. Sign in or register to get started.

Quick Links

Find more posts tagged with

confluence

server

confluence-server

velocity

user-macro