nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Missing Epics in Advanced Roadmaps

jennifer.miles

I'm just starting to setup Advanced Roadmaps. I pulled in my 3 projects and would expect all the epics in the projects to appear on the list; however, several of them are missing. I have one iniative with 4 epics in it (with their stories). Only 2 of the 4 epics are showing up in my roadmap view. Any ideas?

Accepted answers

Irina Mosina _TechTime_

Hi Jennifer,

Couple of things to check around the scope of your plan:

- Are they Unresolved and if Resolved then when?

- Check your plan's for the setting on how long any completed issues stay there

- Do all these Epics belong to the same Jira Project?

- Can some of the Epics be from NextGen Projects?

- Is your plan built based on the list of project, board or a filter?

- If Projects/Boards - did you include all of them?

- If it's a filter - can you see those Epics when you run your filter?

- Check that Epics are not marked as Done in the Backlog view Epic panel

- Is your Epic part of the Releases your've selected when you were building your plan?

Hope it's enough to kick off some troubleshooting

All comments

Irina Mosina _TechTime_

Hi Jennifer,

Couple of things to check around the scope of your plan:

- Are they Unresolved and if Resolved then when?

- Check your plan's for the setting on how long any completed issues stay there

- Do all these Epics belong to the same Jira Project?

- Can some of the Epics be from NextGen Projects?

- Is your plan built based on the list of project, board or a filter?

- If Projects/Boards - did you include all of them?

- If it's a filter - can you see those Epics when you run your filter?

- Check that Epics are not marked as Done in the Backlog view Epic panel

- Is your Epic part of the Releases your've selected when you were building your plan?

Hope it's enough to kick off some troubleshooting

jennifer.miles

Thank you for the response. This helped me figure it out. I had limited the plan to only epics that were assigned a release inadvertantly.

AmyConnell

Hi Jennifer,

My name is Amy, Advanced Roadmaps product designer. I’m following up on your feedback about missing issues from the Plan. Are you open for a quick chat? I would be interested to learn about the problem you experienced, and also share a prototype solution that might help future occurrences of this problem. If you’re interested to chat, please use this link to book in a 45 minute time slot. https://calendly.com/abalsdon/missing-issues-from-your-plan For your time we would like to offer you a $100 E-gift card.

Looking forward to hearing from you,

Amy

Michael Murphy_gabgfc

I have also recently started using this feature and with the information above I am still unable to determine why I am missing the majority of my epics.

I am using a filter which returns ~200 items, however my roadmap only contains ~100 items using the filter as a source.

AmyConnell

Hi Michael,

I am sorry to hear you are continuing the have troubles. I would be interested to learn about the problem you experienced, and also share a prototype solution that might help future occurrences of this problem. If you’re interested to chat, please use this link to book in a 45 minute time slot. https://calendly.com/abalsdon/missing-issues-from-your-plan For your time we would like to offer you a $100 E-gift card.

Looking forward to hearing from you,

Amy

Tom Campisi_1a5huj

+1 for me.

I have a roadmap with 20+ projects and for the most part epics and initiatives correctly show. But I have one where the epic is linked to the initiative in Jira but not in the roadmap. I checked all the above and am struggling to find out why

@AmyConnell - I would be very interested to learn about your prototype solution too.

jennifer.miles

I was able to figure our issue out. It ended up being straight forward to figure out. I had an additional filter defined. Happy to give some overall user feedback of our experience so far. It's been a lot harder to really utilize than we expected.

AmyConnell

Hi Tom,

Sorry to hear you are experiencing issues with your roadmap. If you’re interested to chat, please use this link to book in a 45 minute time slot. https://calendly.com/abalsdon/missing-issues-from-your-plan For your time we would like to offer you a $100 E-gift card.

Looking forward to hearing from you,

Amy

AmyConnell

Glad to hear you were able to figure out the issue Jennifer! I would love to still chat about the problem you experienced and hear your feedback. If you could book in a time here that would be great! https://calendly.com/abalsdon/missing-issues-from-your-plan Look forward to chatting with you

Amy

Perry Lloyd Gollo

Hi all

I had the same issue. The missing epics were in a resolved state. I had to transition them to an In Progress state, and then start the roadmap creation process again. The missing epics then appeared.

Perry

Sean MacWilliams

I am also having a similar issue. When selecting my data sources I have double checked that the epic is being pulled through. When I get to the plan view looking at the initiatives the epics are still missing even when they are associated with the initiative via a parent-child relationship. any suggestions for fixing this issue?

AmyConnell

Hey Perry

Thanks for providing feedback for Advanced Roadmaps new planning experience.
I’m responding to your feedback about several issues not showing up in your plan.

I’ll provide some possible reasons for why issues may not be appearing. If they’re not helpful I encourage you to contact support so our devs can investigate: https://support.atlassian.com/

It’s possible that:

The issue is ‘Done’ - done issues disappear from the plan in 30 days after completion (this can be configured in the Issue sources config page)
Issue cannot be included in the plan if they are missing a resolution date. Advanced Roadmaps relies on the ‘Resolved’ date to determine if the issue was completed in the last 30 days, so if there is no date on the issue then it won’t displayed. https://confluence.atlassian.com/cloudkb/best-practices-on-using-the-resolution-field-968660796.html?_ga=2.37236387.2028121135.1596418064-2054720512.1554092418

I recognise this is an annoying hurdle that would discourage you from trying out Advanced Roadmaps. I hope this can help you get setup.
Your feedback is much appreciated.
Kind Regards,
Amy

Mehrdad Vahabi

@AmyConnell I have a similar problem and would like to go over this issue with you. I limited my plan to one Project, and one EPIC with No filter on and no error but missing a lot of stories. I have to say I had all the stories at initial stage but all of the sudden missed majority of them during planning.

Jenn Sherman

Similar issue. After looking through all the comments above, I tried changing my Epic from done to in progress (even though the epic was set to done within the timeframe I had set in the configuration and the epic did have a resolved date). When I refreshed the plan, the Epic was in the right place, assigned to the right initiative. When I set the epic back to done, it disappeared from the plan - this seems like a bug to me.

Elliot Gates_0cr61q

For anyone struggling with this and has tried all the answers above:

I opted not to use 'versions' in the initial setup of the plan, but one of my epics had a version tagged against it, which kept it from appearing in the plan.

IMO A better approach would be to have the setup wizard disregard the contents of the 'fix versions' field, rather than outright hiding the issue if the field is populated.

Scott Robinson_b2q7jx

@Irina Mosina _TechTime_ - thank you for the list. I have one more to add, but your list led me to the solution. I was missing about half of my epics. There was no pattern - resolved or not, old resolved date, cross-project, etc...When I disabled the Improved Interface, the list of epics present changed, but was still incomplete. When I re-enabled the Improved Interface, all of the epics were now present, in the correct Initiative.

- If in the Improved Interface - disable, then re-enable. (Configure - Planning Interface - Disable improved interface)

Paul Norrod_vhht4n

@Scott RobinsonDisabling and re-enabling new planning interface fixed this for me as well.

Stephan Grubbe_7sqs2x

@AmyConnell I'm working with a clients Jira Server 8.7.1 with Plans 3.27.0. This issue is that I would like to monitor progress for an Epic using issuecount for stories in the Epic.

My problem is that all completed issues and epics disappear from my plan once statusCategory is done. As long as at least one issue remains in progress it works as inteted, once all issues are complete, they are simply removed from the Epic in the plan. When I transition the Epic to a resolved statusCategory it disappears too.

Basically, From this thread I gather that:

- Plans will use StatusCategory to determine if an issue is "DONE".

- Setting the "keep issues in plan days" field can keep the issues visible. I have set this to 999 999 days, since I want them to show always for this project. It seems to be ignored.

- You mention above, that all issues should have resolutions date set, how is this set since issues are not closed only in StatusCategory done and thus have no resolution set (and shouldn't because the need to be tested and verifyed by the customer at a later date).

Any ideas?

Loretta Rehm

@AmyConnell , I am having exactly the same issue reported by Stephan above. Not necessarily issues in a statusCategory Done have their Resolution set in JIRA. Only if you choose to do so via postFunction on Transition to the status.

So if you are relying on Resolved field in JIRA (for the Resolution date), why don't you rely on Resolution field not being empty to choose which issues are "Completed" for the purpose of your filter?

JIRA doesn't impose this on its users, it is a shame that if we want to use Advanced Roadmaps we are forced to revamp Workflows impacting thousand of JIRA issues and metrics.

Indranil Ghosh_7vgkio

I have been facing the same issue and cannot figure out the pattern of why I am not able to see a few epics which are visible through the filter. I have checked all the points from the accepted answer but still not able to figure it out. Any help would be very appreciated. @AmyConnell

Welcome!

It looks like you're new here. Sign in or register to get started.

Quick Links

Find more posts tagged with

cloud

atl-gruland

advanced-roadmaps