nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Configuring F5 load balancer with Jira SSL

Polybio Fernandes

I am trying to use an F5 load balancer with an SSL certificate that is configured on F5 (BIG / IP).

I am not balancing the load of JIRA, it will only be a single server behind a single VIP.

I'm just trying to avoid installing an SSL certificate directly on the Jira server that was installed in the http://jiradev.test.com:8080 standard and I want through the F5 that the certificate is installed to be access through https: // jiradev.test.com
The following is the configuration of "server.xml"

<Connector port="8080" relaxedPathChars="[]|" relaxedQueryChars="[]|{}^\`"<>"
maxThreads="150" minSpareThreads="25" connectionTimeout="20000" enableLookups="false"
maxHttpHeaderSize="8192" protocol="HTTP/1.1" useBodyEncodingForURI="true" redirectPort="8443"
acceptCount="100" disableUploadTimeout="true" bindOnInit="false" />

I would like the procedure to be performed in the jira so that the access is in https without having to install the certificate in Jira and yes only in F5.

Accepted answers

Shankar Asam {Appfire}

Hi,

The procedure is, install SSL certs on F5 and then modify server.xml of JIRA to include scheme, proxyName & proxyPort attributes. Replace them with the appropriate domain and port of the proxy, as in the below example,

<!-- Apache Proxy Connector with values for scheme, proxyName and proxyPort -->
        <Connector acceptCount="100" connectionTimeout="20000" disableUploadTimeout="true" enableLookups="false" maxHttpHeaderSize="8192" maxThreads="150" minSpareThreads="25" port="8080" protocol="HTTP/1.1" redirectPort="8443" useBodyEncodingForURI="true"&nbsp;
            scheme="https" proxyName="jira.atlassian.com" proxyPort="443"/>&nbsp;

Then restart JIRA.

Typically, proxyName value would be the JIRA's URL that is pointing to VIP in F5

Thanks

Shankar

All comments

Shankar Asam {Appfire}

Hi,

<!-- Apache Proxy Connector with values for scheme, proxyName and proxyPort -->
        <Connector acceptCount="100" connectionTimeout="20000" disableUploadTimeout="true" enableLookups="false" maxHttpHeaderSize="8192" maxThreads="150" minSpareThreads="25" port="8080" protocol="HTTP/1.1" redirectPort="8443" useBodyEncodingForURI="true"&nbsp;
            scheme="https" proxyName="jira.atlassian.com" proxyPort="443"/>&nbsp;

Then restart JIRA.

Typically, proxyName value would be the JIRA's URL that is pointing to VIP in F5

Thanks

Shankar

Polybio Fernandes

Hello Shankar!

The setting that you indicated to me right.
I just did comment the default server.xml block and enabled the HTTPS block informing the domain of the certificate that is in F5.
Thank you for your help.

Polybio

Polybio Fernandes

Hello,

I'm having an error on the page below. Do you have any tips to solve this?

"gadget.common.error.500 using nginx and HTTPS"

I'm waiting.
Thank you

Shankar Asam {Appfire}

Hi Polybio,

Please visit the link below to see if the issue got addressed.

https://community.atlassian.com/t5/Jira-Software-questions/Jira8-behind-Nginx-proxy-gadget-common-error-500/qaq-p/1010477

Please make sure that your BASE URL and the proxyName in server.xml should match. And also verify the same in nginx configuration.

thanks

Roy Rizkallah

@Shankar Asam {Appfire} @Polybio Fernandes

Dears,

I am trying to install the SSL on Palo Alto similar to F5. Is there any special config I should do on Jira?

Should I install any certificate on Jira server? It is not working although as mentioned above.

Kindly help. Thank you,

Shankar Asam {Appfire}

Hi,

If you are terminating SSL at F5 or Palo Alto, then you don't have to install / import any SSL certs into JIRA (F5 --> JIRA and JIRA --> F5 will be on HTTP only). You just need to modify server.xml to add your proxy-related config(see above).

If this is not the case and want to have https between F5 and app server (JIRA) - then you will need to import SSL certs into Java's keystore on app server (JIRA) . See this KB article for more info and specifically ( Step 2. Update Tomcat with the KeyStore under Advanced configuration)

-shankar

Roy Rizkallah

@Shankar Asam {Appfire}

Thank you for the reply the first part worked for me. I had to adjust the host file too.

Regards,

Software Asset Management_ealou0

Question related to F5 <<https and correct configuration in server.xml.

Shouldn't base be also https:// in system settings? When do so the server will have error with gadger.500, How to solve it?

The server itself don't have the certificate installed in it. It is in the load balance witch in it's turn translate https to http internally.

on the server it'self doing curl -v https://... will return error

Rebuilt URL to: https://jira.*******.***/
* Trying 127.0.1.1...
* TCP_NODELAY set
* connect to 127.0.1.1 port 443 failed: Connection refused
* Failed to connect to jira.******.*** port 443: Connection refused
* Closing connection 0

Any solution?

Best Regards

Welcome!

It looks like you're new here. Sign in or register to get started.

Quick Links

Find more posts tagged with

server

jira

jira-server