Comments
-
As you mention you've got a bash script that runs to create this jelly script, I'd reuse that. Instead of updating the jelly, I'd use it to create the issue over REST, probably by using curl in the script!…
-
That function might help some people with getting started on ranking (and initial "stick everything at the highest priority at the top of the pile is a good starting approach on a new project) , but it's pretty much useless in real life once you start work. Because you often need to rank things in a different order to…
-
>why would a 'Trivial' priority have any type of Rank over a 'Critical' priority? Imagine this simple case: * xyz-123 Trivial * xyz-126 Critical * xyz-125 Important If xyz-126 cannot be fixed without xyz-123 in place, it must be ranked lower. Rank and Priority do not measure the same thing - priority is about how important…
-
Exactly - priority doesn't make sense in Scrum, only ranking does.
-
No, that's fine, it's just the way you want to do it is one way, and it doesn't work when you're using two ways to prioritise/rank. You need to pick one and stick with it.I suspect you'd like to be able to rank within priority, which would be useful for some teams. But there's no one-size-fits-all solution to this, which…
-
But that's wrong because I'm ranking the issues based on what needs doing first.My point is that trying to use two methods to rank one list does not work. If you make the decision that you are going to rank primarily on priority, then you can't really use ranking much, and your best bet is to drop the scrum planning…
-
But that's wrong, because I've ranked xyz-123 above 125 and 126.
-
The priority is a JIRA core field. The Rank is an Agile field. They don't really play together that well. Most places I know of either bin the priority or just use it as a guide to inform their ranking, rather than an absolute. There's also a logical problem with trying to combine priority with ranking; there's no easy…
-
Ah, ok. Status display is not automatic, you have to map them. In theory, JIRA should look at your filter for the board, pick up all the projects and issue types, scan all of their workflows and dump all the status into the list of possible status for the board, and then show them all in the "configure board" section. You…
-
The "add status" button will only appear if your workflow for the board has been "simplified". If it is not a simplified workflow, then the status within the workflow(s) can only be amended by your administrators. You'll need to ask them to amend the workflow, or simplify it for your board.
-
Possibly. Your licence has an expiry date. You can upgrade to any version released BEFORE that expiry date. If YYY was released after the expiry date, then yes, you need to pay.
-
If you are using the internal system, then it's there. You don't need to do anything other than log in as an administrator. If you can't find it, then you'll need to tell us where you're looking and what you're expecting. What else do you have on the Admin-cog menu for example?
-
You need to be a little more detailed than that. Just adding an internal Jira directory doesn't actually tell us enough to help you. You need to tell us if you are using Crowd, or if you are using Jira's internal system. If it's Crowd and you've added the internal directory in there, then you'll need to check the settings…
-
Start with Administration -> System information - that will tell you most of what you need to know about user management configuration. It won't tell you exact details at a level you can use to start debugging it, but it'll be enough to answer questions you might get asked here if you're struggling with user related stuff.
-
It's disabled by default and Cloud users don't have the rights to enable it. You can ask https://support.atlassian.com to enable it for your instance, but be aware that it may affect performance and they may not do it.
-
An option object is not just a string, you need to get the option out so you can set it. The table you've looked at here is one option per line, and you can see that it's not just "E2" on there. E2 is just the name, the option object is the name, an id, a couple things about where the option applies, a type and a flag for…
-
That would suggest that E1 is not a valid option for the field. I suspect it's because your it.toString will not work for two reasons: * You don't usually compare strings with == unless you're 100% sure you know the format. Try .equals instead. e.g. String1 = "fred" then if String1.equals("fred") * it.toString() is going…
-
How are you building the option from the string that names it?
-
It is what it says - you are trying to set a value in a radio button field which expects an option, not a string. The "E2" in your "set value" code needs to be a select-list option rather than a simple string.
-
Take a look at one of the issues you want to change. Do you have the option to move it through the workflow to "done" in one transition here? (Status is not a field, you have to use transitions to change it). If you do NOT, then that is the problem - you need to work out why there's no transition appearing. If you do have…
-
No, because you can't point two Confluence installations at the same database. You can pay the $10 and install your own system at home, but you will need a database for it and it will be separate to your work one. (It ships with an internal database, so you don't strictly need one, but that internal one is not suitable for…
-
Not without a significant re-write of JIRA Software. Stories belong to Epics.
-
Yes, you got the wrong thing. JIRA Server licences are for running your own server. I would sign up for Cloud and get started in there, then contact https://support.atlassian.com about getting your Server licence cancelled
-
No, it'll let you upload anything. You coul dig through the attachment code to see if there's somewhere to tweak to do it though (of course, there's nothing to stop a user simply renaming their file...)
-
Background on this is at https://answers.atlassian.com/questions/33795/workflow-help I'm stuck - I remember in v3, you could set the order of some things with numbers in the atlassian-plugin.xml, but I've not looked in 4.
-
localhost:8080 means "this machine, port 8080". It will only work on the machine you are running on. It sounds like you've tried that address from your machine, rather than the server. If I'm right with that guess, then you need to change it slightly - try the raw IP address of the server instead - nip onto the server and…
-
That doesn't really make any sense, but I guess you mean "when the trial period ends, what changes in my JIRA system?" Basically, it stops working, you can't add or update your data or use most of the functions. If you buy and apply a licence, then you get all the functions back that you saw during the trial.
-
Please STOP SHOUTING, it's rude. And hard to read. Visual Composer is not an Atlassian product, and you've been led here because their website design is quite poor and doesn't have a decent link to "help with our product". People keep coming here when they're looking for help because there's a tiny link to Confluence at…
-
Sort of. Answers is a fork of OSQA (small link at the bottom of the page here). Atlassian have customised quite a lot of it from what I can make out. OSQA is open source, so you can help yourself to that. There is some talk of Answers becoming a product from Atlassian, but I don't know how far along that is, or if it will…
-
You'll also need to add and/or amend the java that pulls fields out of the other panels - if you want field X to be placed in the people panel (and it's not a user type field already) then you'll need code as Cedric said, to get it available in that panel, AND code to supress it from where it originally appears. And don't…