Comments
-
It might be, but you'll need to look at how you have "marked an issue before" so you can include that in the filter.
-
I'd tend to agree with Frank here - Gantt charts are intended for high-level views of a project, or for planning small parts consisting of a managable number of tasks. 4,000 is simply not a useful thing to try to do on a Gantt chart, the detail is too intricate and the complexity will obscure the overview. (I was told by a…
-
p.s. If it's "a bit slow", you'll be tempted to throw more memory at it. Do not do that without reading about it first, as you can make things worse. Dan's speech covers that too.
-
It's very hard to say what might be wrong without any information to go on. What are the "stability problems"? JIRA does scale to millions of issues, but having lots of issues in it becomes a problem when users try to actually use it - huge piles of issues are intensive to work with. The problem you'll run into is that you…
-
Have you checked the basics? * Is it your dashboard, rather than a shared one? * Are you the admin if you are editing the system one (via Admin menu) * Does it work in other browsers, when logged in as the same person?
-
That's a cascading-select list, not the resolution field. If you really want to use that field, you need to put the options in the custom field option lists (only admins can do that) Secondly, the actual system Resolution field should NOT be put on an Edit screen. It should only appear on screens which are on transitions…
-
Yes, if your licence end date is after the release date of 7.2
-
Depends. If it's a genuine project-picker, then its list of items is drawn from the projects in your system, so deleting isn't an option. If it's a simple select list, then it's easy - disable the options, don't delete them. Deletion strips the values, disabling it just means they can't be added to issues any more, but…
-
As Zulfadli hints, that group might not have been granted the "administrate system" global permission. By default, it is, but I've been to places where the group is not used for that, or is removed completely. Anyway, if it's not that, then the next place to look is in the plugins under Admin to check if functionality has…
-
Well, I know it's a rhetorical question, but I do empathise with you. The basic answer is that if you want flexibility, you end up with complexity of setup. A lot of software is far more simple to configure, but because of it's inherent simplicity, can't be used for clever stuff. Some goes to the other end of the scale and…
-
Screens have nothing to do with mandatory fields, they are just a list of fields that will appear when you try to do things with an issue. The field configuration, where you make a field mandatory, is the important thing. If you have a field configuration that is used for every issue type in every project, then making a…
-
That really does sound like the config of the boards has changed or gone out of range - the message means "it's there, but your setup says hide it". You need to work out why the board is excluding it!
-
Could the sprint have ended? Someone change the config of the board?
-
It's hard to tell. You haven't told us what you've changed, or what other people might have changed. Can you remember any of the stories that were there? If you can find one, check the history to see if it's been changed, and then maybe the sprint planning board to see what config might have changed there to suddenly…
-
Yes, add the custom fields you need and then probably change your workflow to match the acceptance process you have.
-
You can't do that, there's no opt-out. You need to create a permission scheme that does not include you for notifications. As Colin says, project roles are probably the best way to do it.
-
Right, so it's looking like that plugin is causing it - it inserts a number of hooks into the issue screen, so you'll need to work out what you have done. It might not even be a validator or condition - it could be one of the hooks doing something odd. I'd check the versions of the plugin are right for your Jira first,…
-
I honestly don't understand where you are getting the error message. The incorrect spelling tells me it's not Jira, so it must be a plugin or some code you've customised. I'd expect that message and behaviour to be done by a validator, but you say there are none. That doesn't seem right to me, by default, there IS a…
-
Ok, good. That error message is spelt incorrectly, so I doubt it's a Jira error and that implies you are using some form of validation plugin on the create issue transition. (Just in case it was a spelling mistake in Jira's core, could you tell us what version of Jira you are on? 5.1.8? It should be on the footer of every…
-
Ok, good. That error message is spelt incorrectly, so I doubt it's a Jira error and that implies you are using some form of validation plugin on the create issue transition. (Just in case it was a spelling mistake in Jira's core, could you tell us what version of Jira you are on? 5.1.8? It should be on the footer of every…
-
Sorry, I know "Answers" does this sometimes - it pretends to let you upload images, but doesn't actually do it. I don't really need a screenshot, I just need a clear description of what you are seeing. So, can you tell me: * What action you are performing - Edit, Create issue, or a transition * A list of the editable…
-
There are no attachments on this question.
-
That's because you have set a field as mandatory, and then left it blank (it might not even be on the screen). This is exactly what this conversation is about - you are not filling in data for a field you have set as mandatory. I'm struggling to help you because you don't answer the questions I ask which would clarify…
-
Yes, that's correct. The summary is a mandatory field. That's not an error or a problem, it's telling you that you can't blank out the summary.
-
I don't know which question you're answering now. Could you lay out each test you have done, and what the result is here? Without interpreting the results - just the plain text of the error message, unedited.
-
Ok, that error is not the error message I get when I leave a summary blank, which strongly implies something else is giving it. What validators do you have on "create"? Could you also check what happens when the user who is having a problem EDITS an existing issue? Just get them to blank out the summary and try to commit…
-
Does the summary field appear when the user clicks "create"? If it does, do they get a different error if they leave it blank? What exactly happens if they fill it in and commit? The error you are seeing does not look like the standard "You must enter a summary" error in Jira, so it could be from a validator you've added -…
-
You need to remove the right for all users to automatically see everything first - look at how "JIRA users" group is used in projects to grant the right to see things. Once you've unpicked that (replace "can log in" rights with another group, or remove jira-users from all places it's defaulting the right to see issues),…
-
For a field to appear on the issue navigator, it must be valid for all the issues that a filter *might* return. For example, if you have a field called old-issue-no and it only belongs to the project "imported" then it will not appear in the navigator if your filter says "show me issues in project 'Imported' and project…
-
Run the browser. Visit your Jira/Confluence instance.