Caterina Curti Atlassian Team

Hi @[deleted], The filter is not based on the role of the user, instead it is based on the username. Let's work through an example here. Let's say that we have 3 users and a project called project1: - charlie (with Admin permissions on project1) - user1 (with Admin permissions on project1) - user2 (with Write - but not…

Hi @Ishan Vyas, An upgrade to Bitbucket Server 5.4 or higher is required to enable this feature. Are you able to perform the upgrade or ask an admin to do it? Cheers, Caterina

Hi @zamanmd, Can you check if the group has the appropriate permissions in the permission scheme? Which settings do you have in place right now for the project permissions? The Choosing reviewersdocumentation also explains the following: You can choose reviewers from available Crucible users and groups by typing names into…

Great @Alexey Bevetskiy! Thanks for the feedback.

Hi @Davy Dequidt, Based on the stack trace, it looks like the 5.9.1 installation package may have been uncompressed on top of the existing one for 4.4.1. Could you try to unzip it into a new folder and start Bitbucket from there? You can find a similar conversation on this older community question. Cheers, Caterina -…

Hi @姜永超, Would the "Author mapping" feature help? See the Author mapping documentation. Cheers, Caterina - Atlassian

Hi @Sriram Gopalan, Are you integrating Fisheye with a Jira server installation (self-hosted by your company) or cloud (hosted by Atlassian)? The Crucible Gadgets are not available anymore for Jira Cloud as of 24 July 2017, but they are still available for a self-hosted Jira installation. You can find more details on…

Hi @Ishan Vyas, Are you using Bitbucket Server (the self-hosted version) or bitbucket.org (the Atlassian Saas offering)? If you are using Bitbucket Server, you can use the "Pull request - Opened" webhook (see Pull request events - opened for the details of the payload. Webhooks have been added to Bitbucket Server as part…

Hi @Alexey Bevetskiy, The file is not a default one provided with the installer, and it could be that the issue started when that file has been copied to the directory. Since it has been placed in the shared directory, it is likely that this was intentional and you may want to add it to a backup so that, in case a restore…

Hi mkukkapalli@affiniongroup.com, It is unlikely that just by configuring Git, Fisheye became slower. However, it could be that the additional Git repositories require more memory or resources in general. How are the memory and cpu trends for the server? Did you already try to check for OutOfMemory errors and, if needed,…

Hi @Sergii Gatezh, Administrators have the ability to delete SSH keys for the users by browsing to the user details in the administration area. The deletion of SSH keys is logged in the audit log (atlassian-bitbucket-audit.log) with the SshKeyDeletedEvent event. For example, when I try to remove an access key as an admin…

Hi @Leena Bakshi, Can you try to replace the current configuration with the following? server.additional-connector.1.port=443server.additional-connector.1.ssl.enabled=trueserver.additional-connector.1.ssl.key-store=/path/to/keystore/bitbucket.jksserver.additional-connector.1.ssl.key-store-password=<password value> This…

For newer versions of Bitbucket Server (4.+), the correct way to exclude these files is to add one of the following option to the backup-config.properties file: (Recommended) To ignore only the compressed log files in the analytics-logs folder: bitbucket.home.excludes=analytics-logs/*.atlassian-analytics.log.*.gz To ignore…

Hi @Sethuraman Narayanan, I see that the latest version for this app is 5.6.0 (Workzone: PullRequest Workflow), you could try to upgrade to the latest version. If the issue persist, I would recommend reaching out to the app vendor (see details here) or raising a ticket with the Atlassian support at…

Hi @sparkling_girl, 1) A restore is only possible using the command line. At this stage, there is no user interface to perform a restore. 2) Yes, application links will be preserved. However, if you are performing a major change (e.g. changing the base URL), it could be better remove the link before taking the backup and…

Hi @Robert Kerr, Is this question about Bitbucket Server (self-hosted) or bitbucket.org (Cloud)? For Bitbucket Server, it is not possible to add a group by default and we have an open request here: - BSERV-7807 However, I see that this topic has been discussed in the past in this thread and you may find the suggestions…

Hi @pjg, You are spot on here. Bitbucket Server performs the branch starting at the common ancestor. You can follow the conversation on this topic on this feature request: - BSERV-7375 More details on how a Diff in Bitbucket Server is generated are also provided on the Understanding Diff view in Bitbucket Server page.…

Hi @riturajshukla, Have you already tried following instructions on the How do I solve conflict after creating a pull request? page? The documentation refers to Bitbucket Cloud (accessible at bitbucket.org) but can also be used for Bitbucket Server / self-hosted. In the end, the conflict is at the Git level so it applies…

Reviewing SSP-6608, I see that the problem was resolved after removing the BOM at the beginning of the file.

Hi @Ram, Have you seen my reply above (it is the top one in this thread), there is also a screenshot there. Note: this feature is available since Bitbucket Server 4.14.0. Cheers, Caterina - Atlassian

Hi @S S, It could be that the Java version used to run the Backup client is Java 9. If that's the case, can you try to use any version of Java 8 (for example 1.8.0_162) and see if that makes a difference? Cheers, Caterina - Atlassian 

Hi @ZillaYT, That is correct, Bitbucket Server does not have the concept of owner for non-personal repositories. As an option, you could consider checking the "Project permissions" (see the related documentation) to understand who has the ability to create repositories for each project. For an overview of the permissions…

Hi @[deleted], I see your point and this is a behaviour that has already been reported in the past. This is the link to the open feature request to fully support Perforce Streams: - FE-3886 Cheers, Caterina - Atlassian Support

Hi @Rajeesh, According to the CRUC-7410 bug report, this issue is still open and has not been fixed yet. Now the "Affects version/s" field mentions 4.5.2 as well. I see that you also added a comment to the bug report itself and are watching it, you will receive a notification as soon as there is an update on the bug.…

Hi @Harvin Que, I agree with you that this does not seem to be a problem with the backup. Instead, this could be related to the 4.5.3 installation directory itself. We have an article about this: - FishEye Fails to Start: No default permission scheme exists Can you check if the C:\Atlassian\fecru-4.5.3 folder was correctly…

Hi @uday kiran, Can you help in clarifying your question? Maybe by sharing a link to the function you are referring to? In general, the number of users is directly related to the number of users available for the current license. For Bitbucket Server, you can find more details on the Bitbucket Server Licensing page.…

Hi @Brit Davis, If you are using a recent version of Bitbucket Server (higher than 4), I would recommend using the following page: - How to read the Bitbucket Server Log Formats This is the page that we are actively updating according to the new releases and related changes. The How to read the Stash Log Formats refers to…

Hi @Marcelo L. Filho, If the user has an access key setup in his profile (see Creating SSH keys), the SSH instructions will be displayed by default. I just tested it and can confirm that this is still the case with the latest version of Bitbucket Server. Can you try with a user with an SSH key? Cheers, Caterina P.s. this…

Hi @smmathew, Which Continuos Integration tool are you connecting to Bitbucket? For example, if you are connecting the self-hosted version of Bitbucket with Bamboo, you can configure a build to be triggered for every push to a repository. The build status will then be sent back to Bitbucket and can be used as Merge Check.…

Hi @Nirav Patel, Could you provide more details on the exact issue that you are experiencing? Which version of Bitbucket Server are you using? Let me also share some resources that may be helpful in this context: - Search for code in Bitbucket Server: you can find here which characters are removed searchable and which ones…