David Niro Atlassian Partner

Hello @Radim Drinka BS , David from ALM Works here. Rather than creating folders for A, B and C, you can instead Group by your Team field using a Group Generator. When creating the generator, make sure that the "allow changes via Structure" option is enabled. You will also want your Insert Generator to be outside of the…

Hello @Yano , David from ALM Works here. Welcome to the Community! Thank you @Anne Saunders for your suggestion! I believe it will be best to ask our Support team for assistance via email support@almworks.com or through our customer portal support.almworks.com. Based on the error you receive, we will want to review the…

Hello @TScham , Welcome to the Community! The behavior is not necessarily tied to user access, but Global Permissions for apps, such as Structure, to access the issues they need to. Could you check the Global and Project Permissions against what is described in our Permissions documentation? If it turns out that your…

@KD very glad to hear it worked for you!! You are very welcome! There certainly can be a lot to digest while getting familiar with formulas. One place I usually start when trying to come up with a new formula is our Sample Formulas page. It gives me an idea of where to start and then I use the Function and Variable…

Hello @KD , David from ALM Works here. What version of Structure are you currently using? 7.0 introduced the ability to use JQL within a formula. (you can find the version by clicking on the info button bottom right corner of your structure). If you are on 7.0 or higher, have you tried; IF (JQL{ issue in…

@Jurica Petricevic , Thank you. That is the same version I ran my test on and the Effector worked as expected. It will be best to continue the investigation directly with our customer support team. Please reach out to us via email support@almworks.com or through our customer portal support.almworks.com. Best Regards, David

@Jurica Petricevic , Thank you for trying that. What version of Structure are you currently using? You can find it by clicking on the "info" button in the bottom right corner of your structure. Best, David

Hello @Jurica Petricevic , David from ALM Works here. To @Dave Mathijs 's point, the screenshot you shared shows an Original Estimate (field value) column, which is not the same as ∑Original Estimate (field value & aggregation). This would indicate 1w 4d is the value set for the Original Estimate field on your Project…

Hello @Monika , David from ALM Works here. Welcome to the Community! If you are using Structure version 7.4 or higher, we should be able to accomodate this. We do need to know a bit more about your structure. Could you please share the Generators you used to build your structure along with a screen capture of exactly what…

Hello @Estela Cameira , It is possible to add color and other and other visual customizations to a structure on cloud as of our latest release!! It's Markdown rather than Markup on Cloud. This documentation will help get you started. Let us know if you have any questions. You can contact the support team directly via email…

Hello @Estela Cameira , Welcome to the Community! Fariz is using an on-prem version of Structure and from what you have described, it sounds like you are using the Cloud version. At the moment, it is not possible to group by attribute on Cloud. I have made a note of your interest and will follow-up with you here if there…

Hello @Daniel , David from ALM Works here. Welcome to the Community! What you are trying to accomplish can be done through the Attribute to Issue Field Effector. This way you can take the Gantt End Date attribute and push it to your Jira due dates. To answer your question (and plagiarize our wiki content 😁 ): By default,…

Welcome to the Community @Faith Imaikop !

Hello @[deleted] , David from ALM Works here. Welcome to the Community! There is no setting that you've missed. If you've made a copy of a structure, changes to one should not affect the other. It would be best if you contact our Support team directly via email, support@almworks.com or through our customer portal,…

Hello @Lisa , David from ALM Works here. I'm not sure there is a way to do exactly what you describe, though I may just need some additional information. It would be helpful to understand the importance of the Epic Link as it seems the issues linked to Epics have both the Sprint assignment and Labels that we need to build…

Hello @Domenic Wiley , You are very welcome. The Sort Generator is different than an Insert Generator. It needs to be added separately. The document I linked in my previous response describes how to add the new generator. If you have already taken the steps described, and it is not working for you, please contact our…

Hello @Domenic Wiley , David from ALM Works here. Yes! Sort Generators were released in June 2020. Additionally, with the most recent release, you can now also sort by formula results and columns!! If you would like to stay up to date with all of our updates, feel free to subscribe to our release notes. Best, David

Hello @peter_dickermann , Is 40 the number of issues the first user is currently working on? How do you define "worked on"? Seems to be Assignee based on what i see in the screenshot. The way I understand it at the moment is you have a structure that shows active issues, grouped by assignee. You want to have a column that…

So happy to be part of this community! thank you!!!

Hello @Becky Brignall ! What version of Structure.Gantt are you on? (you can find this by clicking on the info icon in the bottom right corner of your structure). There was a bug that was fixed in version 3.0, that this may be related to. If you're on a version later than 3.0, it will be best to review your settings &…

Hello @peter_dickermann , David from ALM Works here. . Assuming you are utilizing Jira's time tracking, you can use a formula like this: SIZE(UNIQUE( worklogs.FILTER($.MAP(DAYS_BETWEEN($.created,today())<30)).author)) The worklogs.FILTER part identifies the worklogs array and filters out the records that were created in…

Hello @Becky Brignall ! At the moment, Structure and Structure.Gantt Confluence gadgets are not editable. I have made a note of your interest and will follow-up here if there are any updates to share. I am curious about the folders and the columns. These are terms we use when referring to Structure. Currently, you can have…

Hello @Alex Hadden-Boyd , David from ALM Works here. It seems it is not possible to do this either way at the moment. We have a task related to adding the functionality to Structure and I have noted your vote. There is also an Atlassian Ticket open, JRACLOUD-2734, to add Last Comment as an issue navigator column. With…

Chicken Vindaloo, cashews and green tea! 

You're very welcome!!!

Hello @Lisa , David from ALM Works here. To make sure I understand the goal: You have a Structure hierarchy with Epic > Stories(other issue types). The goal is to identify how many issues under an Epic do not have Story Point estimates. Is this correct? If it is, you could start with this formula: IF(issuetype = "Epic";…

Hi @Becky Brignall , You're very welcome! You can change the color of the border to white. It will still be there, but you won't see it, since it blends. in with the background. It will look like this: with issuelinks_filter = issuelinks .FILTER($.type = 'Cross Pod Dependency' AND $.source = this):…

Hello @Esraa Hasib , David from ALM Works here. It looks like you are using our app; Structure - Project Management at Scale. Is this correct? If so, we will need to review the Generators that you are using to build your structure. If your Insert Generator is adding Epics to your structure, then you will want to have a…

Hello @Dvir Malka , You are very welcome! You're guess is right on. The next thing we should check is the Project Permissions. Here you will want to make sure that Project Role atlassian-addons-project-access has Browse Projects permission. One other thing to note is that the user will need access to the Project as well.…

Hello @Dvir Malka , David from ALM Works here. This looks like a Global Permission setting that needs to be adjusted. I would start with checking that atlassian-addons-group has access to "browse users and groups". Please let me know if this helps! Best, David