bitbucketからSSHでクローン出来ない

Question

bitbucketのリポジトリをクローンしようとするとエラーが出てクローンできません

git clone git@bitbucket.org:xxxx/yyyy.git

エラー

Forbidden
fatal: Could not read from remote repository.

Please make sure you have the correct access rights
and the repository exists.

そこでbitbucketのPersonal Settings⇒SSH鍵から公開鍵を追加しようとすると

そのSSHキーは既に追加されています

と言われて追加できません。どうすればクローン出来るようになるでしょうか？

お返事お待ちしております。

※HTTPを使用した場合は正常にクローンできます。HTTPでは頻繁にパスワードの入力を求められるのでSSHでクローンしたいのです。

Hiroyuki Sekiguchi · Answer

返信欄を間違えましたので再渇します。以下でアカウントを確認したところhiroyuki-sekiguchiでした。またクローンしようとしているリポジトリも同じアカウントにあります。問題ないように見受けられます。 ssh -T gitbitbucket.org 以下がクローン時のログになります。やはりクローンはできません。リポジトリ名は伏せてあります。 11:08:48.361069 exec-cmd.c:236 trace: resolved executable dir: C:/Program Files/Git/mingw64/bin 11:08:48.362041 git.c:419 trace: built-in: git clone git@bitbucket.org:yyyyyyyyy/xxxxxxxxxxx.git Cloning into 'xxxxxxxxxxxx'... 11:08:48.376031 run-command.c:643 trace: run_command: unset GIT_DIR; 'ssh -v' git@bitbucket.org 'git-upload-pack '\''yyyyyyyyyyy/xxxxxxxxxxxxxxxxxx.git'\''' OpenSSH_7.9p1, OpenSSL 1.1.1a 20 Nov 2018 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Connecting to bitbucket.org [2406:da00:ff00::22c0:3470] port 22. debug1: Connection established. debug1: identity file /c/Users/Hiroyuki Sekiguchi/.ssh/id_rsa type 0 debug1: identity file /c/Users/Hiroyuki Sekiguchi/.ssh/id_rsa-cert type -1 debug1: identity file /c/Users/Hiroyuki Sekiguchi/.ssh/id_dsa type -1 debug1: identity file /c/Users/Hiroyuki Sekiguchi/.ssh/id_dsa-cert type -1 debug1: identity file /c/Users/Hiroyuki Sekiguchi/.ssh/id_ecdsa type -1 debug1: identity file /c/Users/Hiroyuki Sekiguchi/.ssh/id_ecdsa-cert type -1 debug1: identity file /c/Users/Hiroyuki Sekiguchi/.ssh/id_ed25519 type -1 debug1: identity file /c/Users/Hiroyuki Sekiguchi/.ssh/id_ed25519-cert type -1 debug1: identity file /c/Users/Hiroyuki Sekiguchi/.ssh/id_xmss type -1 debug1: identity file /c/Users/Hiroyuki Sekiguchi/.ssh/id_xmss-cert type -1 debug1: Local version string SSH-2.0-OpenSSH_7.9 debug1: Remote protocol version 2.0, remote software version conker_f765b92162-dirty app-162 debug1: no match: conker_f765b92162-dirty app-162 debug1: Authenticating to bitbucket.org:22 as 'git' debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: algorithm: curve25519-sha256@libssh.org debug1: kex: host key algorithm: ssh-rsa debug1: kex: server->client cipher: chacha20-poly1305@openssh.com MAC: compression: none debug1: kex: client->server cipher: chacha20-poly1305@openssh.com MAC: compression: none debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ssh-rsa SHA256:zzXQOXSRBEiUtuE8AikJYKwbHaxvSc0ojez9YXaGp1A debug1: Host 'bitbucket.org' is known and matches the RSA host key. debug1: Found key in /c/Users/Hiroyuki Sekiguchi/.ssh/known_hosts:3 debug1: rekey after 134217728 blocks debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: rekey after 134217728 blocks debug1: Will attempt key: /c/Users/Hiroyuki Sekiguchi/.ssh/id_rsa RSA SHA256:fIvDUMZPt0OAGp0KdqFaOyzekpoYfqpP5ctPlOHmA7U debug1: Will attempt key: /c/Users/Hiroyuki Sekiguchi/.ssh/id_dsa debug1: Will attempt key: /c/Users/Hiroyuki Sekiguchi/.ssh/id_ecdsa debug1: Will attempt key: /c/Users/Hiroyuki Sekiguchi/.ssh/id_ed25519 debug1: Will attempt key: /c/Users/Hiroyuki Sekiguchi/.ssh/id_xmss debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering public key: /c/Users/Hiroyuki Sekiguchi/.ssh/id_rsa RSA SHA256:fIvDUMZPt0OAGp0KdqFaOyzekpoYfqpP5ctPlOHmA7U debug1: Server accepts key: /c/Users/Hiroyuki Sekiguchi/.ssh/id_rsa RSA SHA256:fIvDUMZPt0OAGp0KdqFaOyzekpoYfqpP5ctPlOHmA7U Enter passphrase for key '/c/Users/Hiroyuki Sekiguchi/.ssh/id_rsa': debug1: Authentication succeeded (publickey). Authenticated to bitbucket.org ([2406:da00:ff00::22c0:3470]:22). debug1: channel 0: new [client-session] debug1: Entering interactive session. debug1: pledge: network debug1: Sending command: git-upload-pack 'yyyyyyyyyyy/xxxxxxxxxxxxxxxxxxx.git' debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 Forbidden debug1: channel 0: free: client-session, nchannels 1 fatal: Could not read from remTransferred: sent 3528, received 2008 bytes, in 0.4 seconds ote reposiBytes per second: sent 8836.1, received 5029.1 torydebug1: Exit status 1 Please make sure you have the correct access rights and the repository exists.

Hiroyuki Sekiguchi · Answer

ご回答ありがとうございます。以下でアカウントを確認したところhiroyuki-sekiguchiでした。またクローンしようとしているリポジトリも同じアカウントにあります。問題ないように見受けられます。 ssh -T gitbitbucket.org 以下がクローン時のログになります。やはりクローンはできません。リポジトリ名は伏せてあります。 11:08:48.361069 exec-cmd.c:236 trace: resolved executable dir: C:/Program Files/Git/mingw64/bin 11:08:48.362041 git.c:419 trace: built-in: git clone git@bitbucket.org:i-meisters/manga100website.git Cloning into 'xxxxxxxxxxxx'... 11:08:48.376031 run-command.c:643 trace: run_command: unset GIT_DIR; 'ssh -v' git@bitbucket.org 'git-upload-pack '\''yyyyyyyyyyy/xxxxxxxxxxxxxxxxxx.git'\''' OpenSSH_7.9p1, OpenSSL 1.1.1a 20 Nov 2018 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Connecting to bitbucket.org [2406:da00:ff00::22c0:3470] port 22. debug1: Connection established. debug1: identity file /c/Users/Hiroyuki Sekiguchi/.ssh/id_rsa type 0 debug1: identity file /c/Users/Hiroyuki Sekiguchi/.ssh/id_rsa-cert type -1 debug1: identity file /c/Users/Hiroyuki Sekiguchi/.ssh/id_dsa type -1 debug1: identity file /c/Users/Hiroyuki Sekiguchi/.ssh/id_dsa-cert type -1 debug1: identity file /c/Users/Hiroyuki Sekiguchi/.ssh/id_ecdsa type -1 debug1: identity file /c/Users/Hiroyuki Sekiguchi/.ssh/id_ecdsa-cert type -1 debug1: identity file /c/Users/Hiroyuki Sekiguchi/.ssh/id_ed25519 type -1 debug1: identity file /c/Users/Hiroyuki Sekiguchi/.ssh/id_ed25519-cert type -1 debug1: identity file /c/Users/Hiroyuki Sekiguchi/.ssh/id_xmss type -1 debug1: identity file /c/Users/Hiroyuki Sekiguchi/.ssh/id_xmss-cert type -1 debug1: Local version string SSH-2.0-OpenSSH_7.9 debug1: Remote protocol version 2.0, remote software version conker_f765b92162-dirty app-162 debug1: no match: conker_f765b92162-dirty app-162 debug1: Authenticating to bitbucket.org:22 as 'git' debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: algorithm: curve25519-sha256@libssh.org debug1: kex: host key algorithm: ssh-rsa debug1: kex: server->client cipher: chacha20-poly1305@openssh.com MAC: compression: none debug1: kex: client->server cipher: chacha20-poly1305@openssh.com MAC: compression: none debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ssh-rsa SHA256:zzXQOXSRBEiUtuE8AikJYKwbHaxvSc0ojez9YXaGp1A debug1: Host 'bitbucket.org' is known and matches the RSA host key. debug1: Found key in /c/Users/Hiroyuki Sekiguchi/.ssh/known_hosts:3 debug1: rekey after 134217728 blocks debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: rekey after 134217728 blocks debug1: Will attempt key: /c/Users/Hiroyuki Sekiguchi/.ssh/id_rsa RSA SHA256:fIvDUMZPt0OAGp0KdqFaOyzekpoYfqpP5ctPlOHmA7U debug1: Will attempt key: /c/Users/Hiroyuki Sekiguchi/.ssh/id_dsa debug1: Will attempt key: /c/Users/Hiroyuki Sekiguchi/.ssh/id_ecdsa debug1: Will attempt key: /c/Users/Hiroyuki Sekiguchi/.ssh/id_ed25519 debug1: Will attempt key: /c/Users/Hiroyuki Sekiguchi/.ssh/id_xmss debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering public key: /c/Users/Hiroyuki Sekiguchi/.ssh/id_rsa RSA SHA256:fIvDUMZPt0OAGp0KdqFaOyzekpoYfqpP5ctPlOHmA7U debug1: Server accepts key: /c/Users/Hiroyuki Sekiguchi/.ssh/id_rsa RSA SHA256:fIvDUMZPt0OAGp0KdqFaOyzekpoYfqpP5ctPlOHmA7U Enter passphrase for key '/c/Users/Hiroyuki Sekiguchi/.ssh/id_rsa': debug1: Authentication succeeded (publickey). Authenticated to bitbucket.org ([2406:da00:ff00::22c0:3470]:22). debug1: channel 0: new [client-session] debug1: Entering interactive session. debug1: pledge: network debug1: Sending command: git-upload-pack 'yyyyyyyyyyy/xxxxxxxxxxxxxxxxxxx.git' debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 Forbidden debug1: channel 0: free: client-session, nchannels 1 fatal: Could not read from remTransferred: sent 3528, received 2008 bytes, in 0.4 seconds ote reposiBytes per second: sent 8836.1, received 5029.1 torydebug1: Exit status 1 Please make sure you have the correct access rights and the repository exists.

K. Yamamoto · Answer

アトラシアンの山本です。

公開鍵を追加しようとすると

そのSSHキーは既に追加されています

と言われて追加できません。

例えば他のBitbucketアカウントでSSH公開鍵を登録済みの場合は、ご利用のアカウントに対して同一の公開鍵を新たに登録し直すことはできません。どのアカウントに登録済みかは下記コマンドにてお確かめいただけます。

ssh -T git@bitbucket.org

詳しくはドキュメント Someone has already registered that SSH key をご参照下さい。

どうすればクローン出来るようになるでしょうか？

正しくSSH公開鍵を登録したあとも問題が起こるようであれば、下記コマンドにて詳細なログを出力することで原因の切り分けが行えます。

GIT_TRACE_PACKET=1 GIT_TRACE=1 GIT_SSH_COMMAND="ssh -v" GIT_CURL_VERBOSE=1 git clone git@bitbucket.org:xxxx/yyyy.git